Manual Icom IC-2720H (page 44 of 96) (English)

12302

Zoom out

Zoom in

1/96

4 REPEATER OPERATION

New2001

■ Offset frequency

When communicating through a repeater, the transmit fre-

quency is shifted from the receive frequency by an amount

determined by the offset frequency.

Independent offset frequencies can be set for each operating

frequency.

qPush [MAIN•BAND] to select the desired band (left or right)

as the main band.

• Push [MAIN•BAND] for 1 sec. then rotate the [DIAL] to select the

desired frequency band if necessary.

wSelect the desired mode/channel you wish to set the offset

frequency to, such as VFO mode or memory/call channel.

• The offset frequency can be independently programmed into

each mode or channel.

ePush [SET• ] to enter set mode.

rPush [SET• ] or [LOW•PRIO] until “DUP” and offset fre-

quency appear.

Rotate the main band’s [DIAL] to set the desired offset fre-

quency.

yPush [TONE•DTMF] to exit set mode.

z Push [BAND] to select the desired band (left or

right) as the main band.

• Enter the desired frequency via the keypad if neces-

sary.

x Select the desired mode/channel you wish to

set the offset frequency to, such as VFO mode

or memory/call channel.

• The offset frequency can be independently pro-

grammed into each mode or channel.

Push [

SET

B(D-OFF)] to enter set mode.

Push [

SET

B(D-OFF)] or [

ENT

C(T-OFF)] until

“DUP” and offset frequency appear.

b Push [Y] or [Z] to set the desired

offset.

• Direct frequency entry from the keypad is not possi-

ble.

n Push [

CLR

A(MW)] to exit set mode.

☞NOTE: The offset frequency can be set in a memory/call

channel temporarily. However, the set frequency is cleared

once another memory channel or VFO mode is selected.

To store the offset frequency permanently, overwrite the

channel information.

MAIN

T X

DUP

Push

SET

MAIN

T X

DUP

[SET• ] [LOW•PRIO]

“DUP” and offset frequency appear

USING

SET MODE

IC-2720H_1.qxd 02.12.18 13:02 Page 27 (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2720H in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-2720H Manual

Product: