12296
68
Zoom out
Zoom in
Previous page
1/88
Next page
EXTERNAL DTMF REMOTE (U.S.A. version only)
14
63
When installing the optional UT-49
DTMF DECODER UNIT
, the
U.S.A. version can be remotely controlled using DTMF sig-
nals on the sub band. To operate external DTMF remote, a
144 MHz or 430(440) MHz transceiver with a DTMF encoder
is required.
Set the sub band frequency to receive a control signal
(DTMF code).
The optional tone squelch function can be used for the sub band
to increase remote control reliability. (p. 54)
Program a 3-digit password into the sub bands code chan-
nel 5, if desired. (p. 58)
The initial value of code channel 5 is 000; receive accept. If you
do not require the password, set the channel as receive inhibit.
Select the main band by pushing a tuning dial, then set the
desired frequency for operation.
Push [DTMF] one or more times until REMO appears to
select standby for the remote control.
Set the operating frequency of the controller transceiver
equal to the sub band frequency of the IC-2710H.
Make sure a tone frequency is set when using the optional tone
squelch function with the IC-2710H.
The external DTMF remote does not accept a control signal on
the main band frequency.
From the controller transceiver, transmit the DTMF code as
follows:
•“# and REMO ash while receiving a control signal.
To cancel standby for the remote control, push [DTMF].
•“REMO disappears.
Pushing [FUNC] then [FD-OFF] also cancels standby for the re-
mote control
Password
(if programmed)
(or
F)
(or
E)
Command
(See examples at right)
B # B
M
optional UT-49
IC-2710H.qxd 02.2.8 16:55 Page 63 (1,1)
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info