12296
67
Zoom out
Zoom in
Previous page
1/88
Next page
13
PAGER AND CODE SQUELCH
62
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Set the operating frequency.
Ç Push [FUNC] then [C SQL] to turn the code
squelch ON.
•“C appears in place of the 100 MHz digit.
An optional tone squelch can be used together with
the code squelch. (p. 54)
É Select the desired code channel:
Push [FSET].
Push [Y] or [Z] to select the code channel.
Push [ECLR] to exit the setting display.
Ñ Operate the transceiver in the normal way
(push [PTT] to transmit; release [PTT] to re-
ceive).
Prior to voice transmission, a 3-digit transmit code
is sent each time [PTT] is pushed in order to open
the receiving stations code squelch.
Ö To cancel the code squelch push [ECLR].
Pushing [FUNC] then [FD-OFF] also cancels the
code squelch.
Code squelch operation
Push the desired bands tuning dial.
Set the operating frequency.
Push [DTMF] 3 times to turn the code squelch ON.
•“C appears in place of the 100 MHz digit as shown below.
An optional tone squelch can be used together with the code
squelch, although the pocket beep cannot be used. (p. 54)
Select the desired code channel:
Push [SET].
Rotate the selected bands tuning dial to select the code chan-
nel.
Push the selected bands tuning dial to exit the setting display.
Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).
Prior to voice transmission, a 3-digit transmit code is sent each
time [PTT] is pushed in order to open the receiving stations code
squelch.
To cancel the code squelch, push [DTMF] once (or 2 times
for the U.S.A. version).
The display shows the operating frequency.
C appears in place
of the 100 MHz digit.
C SQL
5
CLR
A
IC-2710H.qxd 02.2.8 16:55 Page 62 (1,1)
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info