12296
48
Zoom out
Zoom in
Previous page
1/88
Next page
9
SCAN OPERATION
43
Programming scan edges
Scan edges can be programmed in the same manner as
memory channels. Scan edges are programmed into pairs of
scan edge channels, 1A/1b to 3A/3b, in memory channels.
Push the desired bands tuning dial.
Set the desired frequency in VFO mode:
Push the selected bands [V/MHz] to select VFO mode.
Set the frequency using the selected bands tuning dial.
Set other data (e.g. offset frequency, etc.) if required.
Push [S.MW] momentarily.
•“! and the memory channel number ashes.
[EXAMPLE]: Programming 145.30 MHz and 145.80 MHz for the VHF scan edges 1A and 1b.
159
159
S.MW MW
Push
VHF
tuning
dial.
then rotate
Rotate
Push
momentarily
S.MW MW
S.MW MW
Push
and hold
continue pushing
Program 1b in the same manner.
Rotate the tuning dial to select a scan edge channel (1A to
3A).
Push [(S.MW)MW] for 1 sec. to program.
3 beeps may sound and the frequency is programmed.
Scan edge 1b is automatically selected when continuing to push
[(S.MW)MW] after programming.
To program a frequency for the other pair of scan edges,
1b to 3b, repeat steps and .
If the same frequency is programmed into both scan edges, pro-
grammed scan will not function.
IC-2710H.qxd 02.2.8 16:55 Page 43 (1,1)
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info