12296
47
Zoom out
Zoom in
Previous page
1/88
Next page
Scan start/stop
D Pre-operation
Common setting: scan resume condition. (p. 46)
For programmed scan: program the scan edges. (p. 43)
For memory scan: program 2 or more memory chan-
nels; set memory skip settings, if de-
sired. (p. 45)
D Operation
Push the desired bands tuning dial.
Select VFO mode for full/programmed scan; or memory
mode for memory scan with the selected bands [V/MHz]
switch.
Set the selected bands squelch to the point where noise
is muted.
Push [(V/MHz)SCAN] for 1 sec. to start the scan.
When the optional tone squelch is in use, [(V/MHz)SCAN] starts
the tone scan.
To change the scanning direction, rotate the selected bands tun-
ing dial.
The memory channel readout indicates the scan type as follows:
9
SCAN OPERATION
42
To select the scan range while operating full/programmed
scan, push [SET] several times.
To stop the scan, push [
(VMHz)SCAN].
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Push [VFO] to select VFO mode for full/pro-
grammed scan; or push [MR] to select memory
mode for memory scan.
Ç Push [HYSQL] or [AZSQL] one or more times
to set the squelch just closed.
É Push [SCAN] to start the scan.
[Y]/[Z] also start the scan when pushed and held.
Ñ To select the scan range while operating
full/programmed scan, push [SET] several
times.
Ö To stop the scan push [ECLR].
SCAN
2
SET
B
During full scan
Push to select full scan
and scan edge
pairs in sequence.
SET L
During programmed scan
Indicates scan edge channels.
P1 stands for 1A/1b.
P1 to P3 are available when
they are programmed.
During memory scan
IC-2710H.qxd 02.2.8 16:55 Page 42 (1,1)
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info