12296
7
Zoom out
Zoom in
Previous page
1/88
Next page
1
PANEL DESCRIPTION
2
t VFO/MHz SWITCHES [V/MHz(SCAN)]
Select and toggle VFO mode and 1 MHz tuning display.
Start a scan when pushed and held. (p. 42)
y MEMORY/CALL CHANNEL SWITCHES
[M/CALL(PRIO)]
Select and toggle memory mode or a call channel.
(pgs. 32, 37)
Activate the priority watch function when pushed and
held. (p. 47)
u SELECT MEMORY/MEMORY WRITE SWITCHES
[S.MW(MW)]
Select a memory channel for programming. (p. 33)
Program selected memory when pushed and held. (p. 33)
i OUTPUT POWER/DUPLEX SWITCH [LOW(DUP)]
Each push changes the output power selection. (p. 25)
There are 3 output powers available: low, mid and high.
Push and hold to select a duplex setting. (p. 27)
There are 3 duplex settings available: minus duplex (“–
DUP appears, plus duplex (+ DUP appears) and simplex.
o DTMF/TONE SWITCH [DTMF(T)]
Turns DTMF memory encoder ON and OFF for au-
topatch operation. (p. 49)
When an optional UT-49 is installed, activates the DTMF
memory, pager or code squelch function in sequence.
Turns the subaudible tone encoder ON and OFF for re-
peater access when pushed and held. (p. 27)
When an optional UT-104 is installed, activates the subaudi-
ble tone encoder, pocket beep or tone squelch function in
sequence.
!0 MICROPHONE
To connect the supplied microphone, detach the front
panel in advance.
Multi-function keypad can be accessed by removing
the keypad cover. (p. 7)
Be careful not to lose the cover.
!1 FRONT PANEL RELEASE LATCH
While pushing this latch, slide the front panel to the left to
remove it.
!2 MICROPHONE CONNECTOR
Connect the supplied microphone or optional EX-1759
IN
-
FRARED RECEIVER
. (p. 11)
!3 CABLE GUTTERS
Pass the microphone cable through one of the gutters
when attaching the front panel.
!4 MICROPHONE RELEASE
Push to release the microphone.
IC-2710H.qxd 02.2.8 16:55 Page 2 (1,1)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info