12242
29
Zoom out
Zoom in
Previous page
1/72
Next page
25
5
REPEATER OPERATION
Auto repeater
(USA version)
The USA version automatically activates the repeater settings
(DUP or DUP and tone encoder ON/OFF) when the operat-
ing frequency falls within the general repeater output fre-
quency range and deactivates them when outside of the
range.
D Setting the auto repeater function ON/OFF
Push [PWR] to turn power OFF.
While pushing [SET] (far left switch), turn power ON to
enter initial set mode.
Push [SET] one or more times until the RPt display ap-
pears as shown below.
Rotate the tuning dial to turn the auto repeater function to
R1, R2 or OFF.
•“R1: auto repeater is ON, tone encoder is OFF.
•“R2: auto repeater is ON, tone encoder is ON.
Push [PWR] to exit initial set mode.
USING
INITIAL SET MODE
9
5
1
Auto repeater function is
turned OFF
X
9
5
1
Auto repeater function is ON,
tone encoder is OFF
D Frequency range and offset direction
Repeater lockout
This function helps prevent interference to other stations by
inhibiting your transmission when a signal is received. The
transceiver has two inhibiting conditions, repeater and busy.
Push [PWR] to turn power OFF.
While pushing [SET] (far left switch), turn power ON to
enter initial set mode.
Push [SET] one or more times until the RLO display ap-
pears as shown below.
Rotate the tuning dial to turn the repeater lockout function
to RP, BU or OFF.
•“RP: Transmit is inhibited when the tone squelch is closed.
•“BU: Transmit is inhibited when a signal is received.
Push [PWR] to exit initial set mode.
FREQUENCY RANGE DUPLEX DIRECTION
145.200145.495 MHz
DUP –” appears
146.610146.995 MHz
147.000147.395 MHz DUP appears
USING
INITIAL SET MODE
Repeater lockout function is
turned OFF
Transmit is inhibited when the
tone squelch is closed
X
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2100H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2100H in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info