516185

Ices IFS 400 Manual

2
Zoom out
Zoom in
Previous page
1/28
Next page
2
IMPORTANT SAFEGUARDS
When using electrical appliance, basic safety precautions should always be followed,
including the following:
1. Read all instruction before using slicer.
2. Close supervision is necessary when any appliance is used near children.
3. Switch off appliance first, unplug from outlet when not used, before putting on or taking
off parts, and before cleaning; Switch off appliance before approaching parts which
move in use.
4. Avoid contacting moving parts. Never feed food by hand. Always use completely
assembled slicer with sliding feed table and piece holder. The appliance must be used
with the sliding feed table and the piece holder in position unless this is not possible
duo to size or shape of the food.
5. To protect against any risk of electrical shock, do not put power unit in water or other
liquid.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the place
of purchase for a replacement or repair free of charge.
7. The use of attachments not recommended or sold by the appliance manufacturer may
cause fire, electric shock or injury.
8. Do not use the appliance outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surface.
10. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.
11. Do not use the appliance for other than its intended use.
PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot. Position slicer on a clean, dry
and smooth surface .
2. Move the sliding feed table back and forth a few times to make sure movement.
3. Place the piece holder on back of the sliding feed table.
4. Select the required slice thickness by turning thickness adjusting knob, clockwise for
thinner slice and counter-clockwise for thicker slice. The range of thickness adjusting
is from 0 to 15mm.
Thickness Adjusting Knob
(fig.2)
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ices IFS 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ices IFS 400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info