675871
13
Zoom out
Zoom in
Previous page
1/23
Next page
13
2.14 Mount the mixing blades inside the bottom drum loosely as shown.
2.15 Two holes are provided at the base of the drum into which an M10x20 cross head
screw can be inserted from the outside.
2.16 A leather washer, flat washer, lock washer and nut should be threaded on loosely on
the inside.
2.17 The leather washer should be placed under the blade down against the drum.
NOTE
Two arrows are marked on the upper drum and bottom drum to allow you to align them
correctly.
If you have any difficulty in correctly positioning the mixing blades, it is helpful to
temporarily mount the upper drum onto the lower drum, rotating it so that the two
arrows line up.
2.18 Position the upper drum on the lower drum over the rim, making sure the mounting
holes align in both, as well as the arrows.
2.19 Screw an M8x16 hex bolt with lock and flat washers into each threaded hole in the
rim/ring gear. Make sure the tightening process is carried out progressively.
2.20 Secure the mixing blades to the upper drum by inserting two M10x20 cross headed
screws from the outside through the holes in the drum.
2.21 A leather washer should be positioned inside, between the drum and the blade.
Secure the mixing blade on the inside using a flat washer, spring washer and nut.
2.22 Finally, ensure the top and bottom mixing blade mountings are tight.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai HYCM160 - 57376 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HYCM160 - 57376 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info