675871
12
Zoom out
Zoom in
Previous page
1/23
Next page
12
2.6 Turn the frame over and attach the axle bracket with wheels in the same manner.
2.7 Make sure all the nuts and bolts are tightened.
2.8 Slide the bottom bearing block onto the shaft and hold it in place with Ø42 spiral ring.
2.9 Carefully, with 2 people, set the bottom drum with support arm onto the side supports
of the stand shown, so that the bearing block slots into the channel provided by the side
support while the larger diameter shaft sits on the bottom bracket.
2.10 Line up the holes in the side support with those in the bearing block and insert an
M8x65 hex bolt from one side, then a flat washer, lock washer and nut from the other
side.
2.11 Place the upper bracket on the large diameter shaft with the holes lining up with the
ones in the bottom bracket.
2.12 Insert two M8x20 bolts through the holes, then the flat washers, lock washers and nuts
from below.
2.13 Tighten securely.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai HYCM160 - 57376 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HYCM160 - 57376 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info