813010
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
4 5
6
8
7
2 3
NOTE: After  minutes, the unit will leave the pairing
mode and automatically go into standby mode.
7 Connect the power supply immediately to the stove.
If the supply to the stove is not connected within 
minutes after the wireless room temperature sensor
is plugged into "pairing mode", the pairing will not
succeed, and will have to be restarted.
8 After the room temperature sensor is connected to
HWAM® SmartControl™ the light will briefly turn solid
green and the indicator light will then turn o. Pairing
has been successfully completed. Put on the lid and
screw in again.
1 Turn the unit on its rear end.
2 Unscrew the four screws on the backside (as shown
in the picture) to access the batteries.
3 Remove the lid from the unit.
4 Take one battery out of the unit.
5 Disconnect the power supply to the stove.
6 Press the button on the front of the wireless room
temperature sensor and hold the pressure while the
battery is put back into the unit, until the LED lights
green. When the wireless room temperature sensor
starts up, it will flash green at a fast pace as illustra-
ted below:
Pairing of the room temperature sensor with HWAM® SmartControl™
It may sometimes be necessary to pair the wireless room temperature sensor with HWAM®
SmartControl™. To do this, it is necessary to put the wireless room temperature sensor in pai-
ring mode (see instructions below).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam SmartControl Generation 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam SmartControl Generation 2 in the language / languages: English as an attachment in your email.

The manual is 4.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam SmartControl Generation 2

Hwam SmartControl Generation 2 User Manual - German - 24 pages

Hwam SmartControl Generation 2 User Manual - Dutch - 24 pages

Hwam SmartControl Generation 2 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info