744548
34
Zoom out
Zoom in
Previous page
1/52
Next page
34
The Draught Diverter should be fi tted to the top of the Firebox as shown on drawing F(a), and
then standard fl ue system can be connected from this point.
Please follow this procedure to turn a closed system into a standard outlet:
1. Remove the front of the stove by gently pulling the jacket towards you.
2. Install the downdraught outlet which you will fi nd in a box in the combustion chamber.
3. The connecting cables from the downdraught outlet must be attached to the cables from the
burner.
4. Make sure that the sensor (TTB) and the cables from the downdraught outlet always face the
rear. Then lead the cables down between the rear side of the combustion chamber and the
inner side of the rear of the stove.
5. Now lead the cables down to the burner and attach them to the two cables from the valve.
How the cables are connected is not important.
6. Remove the pressure equalisation hatch (F(b)) in the bottom of the combustion chamber by
removing the two bolts beneath the combustion chamber.
7. Replace the front of the stove.
Important
· The draft diverter for use with standard fl ue connection incorporates the fl ue spillage monitoring
system.
· The spillage monitoring system must not be put out of action.
· Only original manufacturer’s parts must be used in service replacement of the spillage monitor-
ing system.
Ventilation (G.B. only)
The Carmen Balanced Flue or natural draught has no requirement for additional ventilation in
the room.
The Figaro Balanced Flue has no requirement for additional ventilation in the room.
The Figaro Natural Draught requires additional ventilation in the room in a size of 100 cm
2
Connecting the appliance
Connecting the gas
Ensure that the gas supply pipework is capable of delivering the required volume of gas in
accordance with the relevant British Standards.
Do not make any connections to the appliance until the pipe work has been purged to expel
any dust or debris. Failure to do this may result in a blockage in the system that will invalidate
the guarantee.
Final connection should be made using 8 mm or 12 mm semi rigid pipe no more than 1 metre
in length. The nut and olive is supplied to make installation easier.
The gas supply to the stove should terminate with a standard type safety/restrictor tap.
For gas connection from R/H Side, a straight piece of pipe will be required. For gas connection
from the L/H Side, a pipe with a “U” bend will be required.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam Figaro gas at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam Figaro gas in the language / languages: English, German, Danish, Swedish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam Figaro gas

Hwam Figaro gas User Manual - Dutch, French, Italian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info