571921
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
fIttIng the loose Parts
Before you start using the stove, you must ensure that all loose parts are fitted correctly.
Vertical cross-section of HWAM Classic 4 (Drawing A)
1. By-pass damper. Can tip freely when the by-pass lever is pulled.
2. Smoke shelf. Is placed on top of the side stones.
3. Ember / log guard. Is placed behind angles in both sides.
Mounting of the baking section
We recommend that the stove is connected to a top outlet in order to achieve the highest possible
temperatures in the baking section. Before mounting the baking section, the covers and the rings for
the cooking holes are removed, and the smoke outlet to the rear is closed. After this a new Ø5 mm
sealing (8) is placed down into the smoke outlet socket (drawing A1). At the same time a cushion (9)
made out of the stove kit delivered with the baking section is placed round in the edge of the coo-
king holes (drawing A2). Then the baking section (5) is placed on top of the stove so the smoke inlet
sockets of the baking section are standing down in the smoke outlet as well as in the cooking holes
on top of the stove. Chimney or smoke flue (11) is connected, and the cooking holes are closed with
the cover plates coming from the cooking holes of the stove.
The function of the baking section
When the by-pass damper of the cooking section in pushed in, the hot smoke gas is conducted up
around the baking section, thus giving the maximum heat in the baking section. When the by-pass
damper (7) of the baking section is pulled completely out, the smoke gas is conducted behind the
baking section and directly out into the chimney, thus giving minimum heat in the baking section.
Consequently, the temperature in the baking section is regulated by opening the by-pass damper
more or less.
Valve in the baking section
In the baking section a valve is mounted that, when opened, is functioning as an extraction in the
cooking section when it is used.
Mounting of the wood magazine
The wood magazine (6) is placed where the stove is to stand, and the stove is placed on top of it. The
four guide pins on the wood magazine must catch the legs of the stove. If the stove tips a little in the
coupling between the stove and the wood magazine, this is adjusted by means of the two adjusting
screws (10) mounted at the back of the wood magazine.
Air damper in the front door (Drawing D)
The air damper in the front door regulates the rinsing air that keeps the glass free from soot. The
sliding damper should only be closed that much down that the rinsing air is still able to keep the
glass clean.
The rinsing air enters into the secondary air supply ensuring a good secondary combus-tion of the
smoke gases.
The glass in the door can only keep itself free from soot, if the chimney draft is sufficient, the combu-
siton is optimal, and if the firewood is dry. At nominal chimney draft, half open will be suitable.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam Classic 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam Classic 4 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam Classic 4

Hwam Classic 4 User Manual - German - 16 pages

Hwam Classic 4 User Manual - Dutch, French, Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info