The stove must be cold before you start cleaning it. Use a dry, soft lint-free cloth to dust off the painted surfaces. Do not use water, spirits or any
type of detergent, as this will damage the paint.
We recommend that the inside of the window should be cleaned with damp kitchen roll dipped in ash. Then wipe off with clean kitchen roll.
Use a conventional detergent for glass surfaces to clean the outside of the window. Apply the detergent to a clean, dry cloth and then polish the
outside of the window. Avoid spraying detergent directly on the window, as it may drip down and damage the painted surfaces of the stove. We
recommend that you only wipe off a cold stove.
Ash
Ash should be removed regularly to ensure that it does not block the air supply in the rear insulation plate of the combustion chamber.
We recommend removing ash from the combustion chamber with an ash suction device.
Ash can be disposed of through daily refuse collection. Be aware that embers in the ash can remain hot up to 24 hours after the fire in the stove
has gone out!
mainTenanCe
Maintenance
Regularly check to make sure that seals in the door are complete and soft. If not, they should be replaced. Use only original spare parts.
The stove should be thoroughly cleaned once a year. Ash and soot must be removed from the combustion chamber. Use copper grease to lubricate
hinges and locking fastenings.
Service inspection
At least once every other year, the stove should receive a thorough, preventative service inspection. Among other things, the service inspection covers:
• A thorough cleaning of the stove.
• Checking the spring in the HWAM
®
Autopilot
TM
unit and replace if necessary.
• Checking gaskets. Replace gaskets if they are not intact or are no longer soft.
• Inspection/possible replacement of heat insulation material.
• Lubricating the hinges and locking fastenings with copper grease.
The inspection must be performed by a qualified professional. Use only original spare parts.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hwam 5530 - Smartcontrol at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hwam 5530 - Smartcontrol in the language / languages: English as an attachment in your email.
The manual is 2,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
