744526
17
Zoom out
Zoom in
Previous page
1/20
Next page
Page 17 of 20 pages
Cleaning the glass
We recommend wiping the glass after a fire. This is best done using a paper towel.
Types of fuel
The stove may be damaged by very high temperatures and the glass may turn white, for example. This can
be avoided by never allowing the stove to burn with the ashpan open and taking great care with types of
fuel that develop excessive heat, such as briquettes.
We recommend using birch or beechwood, which has been split and stored for at least one year outdoors
under cover. Wood stored indoors tends to become too dry and burn too quickly.
Briquettes give off a lot of heat. Certain types expand considerably, thus causing an uncontrollable combustion.
The stove is EN 13240 approved for firing wood only. No particle board, lacquered, painted
or treated wood, plastics, or rubber may be burned.
maIntEnancE
Cleaning
Any maintenance of the stove should only be carried out when it is cold. Daily maintenance is limited to
vacuum cleaning the stove externally, using the soft brush attachment. You can also dust the stove using a
dry, soft cloth or brush. But remember, only when the stove is cold. Do not use water, spirit or any other
kind of cleaner, as this will damage the lacquer.
Once a year, the stove should be thoroughly serviced. The combustion chamber should be cleared of ashes
and soot. The hinges and the closing hook must be greased with liquid copper fat spray (heat-resistant
up to 1100 °C), see drawing H. Lift the door approx. ½ cm and spray copper fat onto the hinge leaf.
Service inspection
Your stove should be given a thorough, preventive inspection once every two years. This includes:
Thorough cleaning of the stove.
Check the spring in the Autopilot unit and replace if necessary.
Checking gaskets. Replace gaskets if they are not intact or have softened.
Checking of heat insulating material and possibly replacement.
Checking of the bottom/shaking grate.
Use copper grease for hinges and locking hooks (see drawing H).
All service checks must be performed by an authorised fitter. Use only original spare parts.
Inside cleaning
Before chimney sweeping can be performed, the regulator must be set to its minimum position to prevent
soot and ash from entering the Autopilot control.
The smoke shelf and baffle plate is to be removed from the stove before cleaning (Drawing F).
First lift the smoke shelf (1) out of the steel rail (2) at the back of the combustion chamber. Next, lower
it beneath the holders (3) and slide it out.
• Lift each half of the steel smoke plate (4) off the holder (5) behind the smoke pipe, and remove them
from the hook (6) beneath the top plate.
Ashes
The ash pan is best emptied by pulling a waste bag over the pan, tipping it and then carefully pulling it out
of the bag. Ashes are disposed of via the domestic waste collection.
Please note that there may be embers in the ashes for up to 24 hours after the fire has
gone out!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam 3740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 3740 in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 3740

Hwam 3740 User Manual - German - 20 pages

Hwam 3740 User Manual - Dutch - 20 pages

Hwam 3740 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info