627059
56
Zoom out
Zoom in
Previous page
1/64
Next page
56
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
11
linear error compensation (linear)
Attention!
Linear error compensation may only be used in absolute mode (ALE) and with
millimeters displayed.
Linear error compensation allows the operator to apply a constant correction factor to all
measurements displayed. The further away the encoder is mounted from the centre line of the
workpiece, the greater the potential for linear error is. Linear error correction is expressed as a
multiplier, which is displayed for each axis.
Compensation factor = (true distance–measured distance) / (true distance/1000) mm/m
Correction range: -1.500 mm/m~+1.500 mm/m
Example: the actual length of the machine table measures 1000 mm, the display shows 999.98 mm.
This means:
Compensation factor = (1000 – 999.98) / (1000/1000) = 0.02 mm
Select the X-axis.
Display in inches.
Enter the correction factor.
Conrm.
7.7 Sleep mode
The switch on the rear of the display can be switched off during operation. Even though the display
has a memory, in which in case of power loss all data is stored, it is still possible that the tools during
power loss have been moved. Therefor, after switching on the display again, the actual situation is
not displayed correctly. To avoid this problem, it is advised not to switch off the display but to use the
Sleep function.
Attention!
The function Sleep is only available if the display is NOT in absolute mode.
Proceed as follows:
Press . Display is dimmed.1.
When resuming work, press , all data becomes visible again. 2.
storaGe DurinG power loss
When a power loss occurs during operation or when then machine is switched off, then the display will
automatically store the operating status (for example the values displayed and the linear compensation
factor). The display will perform a self-check rst after the power has come on again. After that, it will
return to the spot were it left off and operation will be resumed from this position on.
Coefcient last used
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 900 A-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 900 A-4 in the language / languages: English as an attachment in your email.

The manual is 11,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 900 A-4

Huvema HU 900 A-4 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info