627059
58
Zoom out
Zoom in
Previous page
1/64
Next page
58
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
13
The direction of the co-ordinate of the entered SDM’s in the example as mentioned above, equals the
opposite of the result on the display. If a co-ordinate of a SDM in UCS-mode is entered on the position
of the zero in absolute mode, then the display will show the position of the absolute zero, because in
UCS-mode, every SDM is seen as the origin of the UCS.
In g. 1, position O in regard to position 1 has co-ordinates (-20, 70), in regard to postion 2 (-30,
120) and in regard to position 3 (-20, 130). If the operator enters the co-ordinate of a SDM on another
position than the absolute zero in the absolute mode, than the display will show the position of this
point in UCS-mode.
Using subsidiary reference points
Open the mode to enter reference points by pressing or . In case the arrow keys are used,
please press them continuously until the desired menu option is reached. Only pressing will lead to
the message “Zero no”. Enter the number of the reference point here.
The workpiece is processed in coarse way. Fine processing is needed now. The play for coarse
processing measures 0.05.
Set the absolute co-ordinate on position A. Use Method I to set the SDM’s. The rst co-ordinate is (10,
-40), the second (20,05, -70) and the third (30.05, -120).
Check the tool. Start entering.
Enter the code.
Process Ø 20. Start processing until the displays of both X-
and Y-axis show 0.
Enter the second co-ordinate.
Proces Ø 40. Start processing until the displays of both X-
and Y-axis show 0.
Enter the third co-ordinate.
Process Ø 60. Start processing until the displays of both X-
and Y-axis show 0.
Return to the absolute mode. Keep pressing the arrow key,
until ALE is displayed.
Turn the tool to the other side, the other Ø 40 can be
processed.
Erasing reference points
Press in absolute mode 10 times on , all entered co-ordinates will be erased.
Reset of reference points
It is possible during an operation to enter a new co-ordinate. When resetting, the point on which the
reset started will become the new reference point.
Use ½ when using an extra reference point
can be used when the operator enters a reference point. It also leads to a reset of the reference
point. This will ly between the old and the new reference point.
A (0,0)
C
25
D
0. 8
B
X
X
0. 8
0. 8
155
10
φ 71
φ 40
φ 60
70
40
φ 20
φ 40
SEL
1
2
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 900 A-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 900 A-4 in the language / languages: English as an attachment in your email.

The manual is 11,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 900 A-4

Huvema HU 900 A-4 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info