627068

Huvema HU 460 X 1500 VAC Manual

19
Zoom out
Zoom in
Previous page
1/60
Next page
19
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
10. lUbricaTion
10.1 lUbricaTinG headsTock
An oil-splash feed is utilized in the lubrication system of Headstock. On top of the Headstock there grooves
surrounded providing lubricant flow into the spindle bearing along the groove, and then finally flow down on the
bottom of the box. When supplying the lubricant, remove the cap of oil sight glass. To drain the waste oils away, a
drainer hole located in the right side downward of the Headstock.
Please take good care of checking whether the Headstock has been filled up with lubricant or not when you
purchase the machine. If negative, use as show in the figure (6-4) lubricating oil. We request you to change
the lubricant at first month and then do once every two months so to assure the gears are working in the best
conditions.
10.2 lUbricaTinG Gear box and apron
Gear Box is oil-bath lubricated to insure the lifetime of gears and bearing. It is recommended the lubricant to be
changed every six months.
Apron is also oil-bathed. If the oil quantity in Apron is lower than center level of oil sight glass, then it is time to add
up some oil to standard level.
10.3 UsefUl reference lUbricaTinG Table for oTher mechanism
No. Location How How
many
For how long
to
Oil exchange time
1 Headstock Remove the screws of
filler hole on left side up
L Once a month One month, then every
two month
2 Gear Box Open top cover remove
the screws of filler hole
L Once a month Every half year
3 Apron Remove the screws of
filler hole
L everyday
4 Compound
Rest
By oilcan approp. everyday
5 Auto Feed
lever
By oilcan approp. everyday
6 Tailstock By oilcan approp. everyday
7 Lead screw By oilcan approp. everyday
8 Bracket of
Three Rods
Remove the screw of filler
hole
approp. everyday
9 Bed way Press the manual oil
pump
approp. everyday
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 460 X 1500 VAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 460 X 1500 VAC in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info