627068

Huvema HU 460 X 1500 VAC Manual

15
Zoom out
Zoom in
Previous page
1/60
Next page
15
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
8.4 “inTermiTTenT”
operaTion of main spindle
For the convenient way of changing Main
Spindle Speed, confirming Feed Speed and
Centering objects, the machine equipped with
“INTERMITTENT” button (9) located in the right
side of Gear Box. Push it down, Main Spindle will
immediately rotate forward; and if to release
the button, it stops. Note that the intermittent
function cannot rotate reversely.
8.5 The imporTance and meThods of spindle leVelinG adjUsTmenT
Switch on to make the Spindle turn while the Spindle is set
up at 1330 r.p.m. By putting the palm of the left hand on the
Headstock cover to feel its chatter. An unlevelling Spindle will
lead to lathe chatter. Move Leveling Block (either “A” or “B”)
left or right to adjust until your left hand feels the minimum
chatter.
Afterwards, change the Spindle speed to 2000 r.p.m. or 900
r.p.m. and check the Leveling with the same way as we did at
1330 r.p.m. by adjusting the Leveling Block “A” or “B”.
8.6 Transmissions and sTop of Gear box
Open the end side cover of Headstock, you will find a gear train transmit the power from Headstock to Gear Box.
Shift Forward/Reverse Lever (4) to right side, it runs forward, or to left side, reversely, or it stops if you shift it to the
middle position. Never change speed while machine is running.
8.7 operaTion of Gear box
8.7.1 cUTTinG Threads
• A special designed gearbox, you need not to use back gears to proceed threading. Please refer to gearbox
cutting feed table and shift to appropriate Thread Feed Select Lever (5) (6) (7) respectively then you may obtain
required specification.
8.7.2 aUTo feed
• The selection of Auto Feed should be coordinated with the cutting speed and feed speed. Please refer to cutting
table and select proper feed speed and follow the instruction plate to shift thread Feed Select Lever (5)(6)(7).
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 460 X 1500 VAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 460 X 1500 VAC in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info