627040
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
7.4 Drill DePth aDjUStment
To prevent the drill from going too deep into the work piece, you can set the
feeding limit by adjusting the position of the feed depth knob (A, figure 13).
Loosen knob A
Turn scaled ring B to the desired feeding depth
Lock knob A
7.5 SPeeD Selection
Drill
diameter
(mm)
Material
Cast Iron Steel Iron Aluminium Alloy Copper
2 4780 1275 3980 7960 4460
3 3185 850 2650 5310 2970
4 2390 640 1990 3980 2230
5 1910 510 1590 3185 1785
6 1590 425 1330 2655 1485
7 1365 365 1140 2275 1275
8 1195 320 995 1990 1115
9 1060 285 885 1770 990
10 955 255 800 1590 890
11 870 230 725 1450 910
12 795 210 665 1330 745
13 735 195 610 1225 685
14 680 180 570 1135 635
15 640 170 530 1060 600
16 600 160 500 995 560
17 560 150 470 935 525
18 530 140 440 885 495
19 500 135 420 835 470
20 480 130 400 795 445
25 380 100 320 640 355
30 320 85 265 530 300
40 240 65 200 400 225
Figure 13
3-2.Operation illustration and procedure:
1. There are three T grooves in the worktable. It is used to fix the work piece.
1-1.There are two T grooves in the base, too. It is convenient for fixing the longer, heavier and larger
working piece.
OPTION
2. The pulley cover is strictly prohibited to open in normal operation condition.
3. Protect safety guard shall be allocated in a proper position in operation. It is controlled by a micro
witch. (For CE)
4. Adjustment of feeding limit
To prevent unwanted penetration to work piece, the feeding limit
shall be set by adjusting the appropriate position of feeding depth
fixing button as long as the distance between the end of tool and
top surface if work piece is measured.
A. Setting of feeding depth
1. Loosen knob A.
2. Turn scaled ring B to desired feeding depth.
3. Lock knob A.
15
Lock
Loose
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 30FP SUPER VARIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 30FP SUPER VARIO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 30FP SUPER VARIO

Huvema HU 30FP SUPER VARIO User Manual - German - 20 pages

Huvema HU 30FP SUPER VARIO User Manual - Dutch - 20 pages

Huvema HU 30FP SUPER VARIO User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info