477575
55
Zoom out
Zoom in
Previous page
1/72
Next page
55
6
Cuchillas
Para alcanzar resultados mejores las cuchillas de la segadora
hay que mantenerlos afi lados. Sustituya las cuchillas torcidos
y estropeados. El afi lado puede hacerse con lima o muela.
NOTA: Es muy importante que los dos lados de la cuchilla
sean afi lados igual a in de impedir desequilibrios.
C'MO DESMONTAR LAS CUCHILLAS:
Eleve la segadora hasta su posición más alta para poder
alcanzar las cuchillas.
Desentornille el tornillo de cabeza de seis facetas, la
arandela elastica (de resorte) y la arandela plana que
sujetan la cuchilla.
Monte la cuchilla nueva o afi lada con el canto trasero
hacia arriba adjunto a la plataforma como indicado.
IMPORTANTE: Para asegurar un montaje correcto el orifi -
cio central de la cuchilla hay que ajustarlo a la estrella del
mandril.
Monte otra vez el tornillo de cabeza de seis facetas, la
arandela elastica y la arandela plana en sucesion exacta
como es indicado.
Apriete establemente el tornillo (momento de rotacion
27-35 Ft. Lbs.).
IMPORTANTE: El tornillo de la cuchilla es de tratamiento
tèrmico-clase 8.
Lame
Per avere il migliore risultato di taglio, è necessario che le
lame siano ben affi late. Sostituirle se usurate o danneggiate.
A tale scopo utilizzare una lima o una mola.
NOTA: E’ importante affi lare le due estre mi tà della lama in
modo uniforme per non creare disequilibri.
RIMOZIONE DELLE LAME:
Sollevare la macchina per avere accesso alle lame.
Disserrare il bullone a testa esagonale, la rondella elas ti ca
e la rondella piatta che fi ssano la lama.
Montare una nuova lama o una lama con palettaura
posteriore rivolta verso il piatto, come indicato.
ATTENZIONE: Per assicurare un buon fissaggio centrale
della lama, è necessario che questa combaci perfettamente
con il mozzo.
Montare il nuovo bullone a testa esagonale, la rondella
elastica e la rondella piatta nell'ordine esatto, come indi-
cato.
Restringere bene il bullone di bloccaggio della lama (cop-
pia di serraggio: 27-35 ft./lbs)
ATTENZIONE: Il bullone di bloccaggio della lama è stato
sottoposto a trattamento termico di classe 8.
Messen
Voor de beste resultaten moeten de maaimessen scherp
gehouden worden. Vervang gebogen of beschadigde mes-
sen. Het slijpen kan geschieden met een vijl of met een
slijpschijf.
N.B.: Het is zeer belangrijk dat beide uiteinden van het mes
even-veel worden geslepen, om onbalans te voorkomen.
MES VERWIJDEREN
Zet de maaier in de hoogste stand om bij de messen te
kunnen.
Verwijder de zeskantbout, de veerring, en vlakke ring die
het mes op zijn plaats houden.
Monteer een nieuw of geslepen mes waarbij het sleep
(hulp) mes omhoog naar het maaidek gericht moet zijn,
zie afbeelding.
BELANGRIJK: Om zeker te zijn van goede montage moet het
centrumgat in het mes passen met de ster op de mandrijn.
Bevestig de zeskantbout, veerring en vlakke ring weer
in precies dezelfde volgorde als op de afbeelding te zien
is.
Haal de bouten stevig aan (aandraaimoment 27-35 ft.
lbs.)
BELANGRIJK: De bout van het mes is warmtebehandeld
volgens klasse 8.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna YTH151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna YTH151 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info