734150
15
Zoom out
Zoom in
Previous page
1/368
Next page
To clean the product externally
1. Stop the product, see
To stop the product on page
13
.
2. Clean the product with a dry cloth, and a small
quantity of spray polish.
To replace the filter
The product is designed for continuous heavy work.
Depending on the number of running hours, the dust
filter should be replaced.
1. Stop the product, see
To stop the product on page
13
.
2. Unlock the clasps and lift off the motor unit. (Fig. 8)
3. Rotate the filter tension (A) counter clockwise and
pull it out. Pull out the filter (B). (Fig. 32)
4. Install the new filter (A). Install the filter tension (B)
and rotate it clockwise. (Fig. 33)
5. Make sure that the filter and the filter tension is in
position. (Fig. 34)
6. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
To replace the filter bag
1. Stop the product, see
To stop the product on page
13
.
2. Unlock the clasps and lift off the motor unit. (Fig. 8)
3. Do a check to see if the filter bag is full. Remove the
filter bag if it is full.
4. Pull the cardboard part of the old filter bag from the
vacuum inlet.
5. Lift the filter bag (A) and discard it.
6. Put the new filter bag in the dirt container (B).
7. Attach the cardboard part of the filter bag on the
vacuum inlet (C). Make sure that the rubber
membrane is passing past the heightening of the
vacuum inlet. (Fig. 35)
8. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
Transportation, storage and disposal
Transportation and storage
After use:
Disconnect the plug from the mains when the
product is not in operation.
Wind up the cord starting from the product.
Use the cable holder to attach the cord on the
motor unit.
Wind up the hose.
Use the hose holder to attach the hose on the
motor unit.
Transport:
Close all clasps on the motor unit.
Do not tilt the product if there is liquid in the dirt
container.
Do not use a crane hook to lift the product.
Storage:
Keep the product in a dry and frost free area.
To recycle the product
Follow these steps to make the product unusable.
1. Disconnect the plug from the mains.
2. Cut the power cord.
3. Do not discard the product in usual domestic waste.
Disposal (in accordance with 2012/19/
EC):
The product must not be added to normal household
waste. It must be disposed of in line with local
environmental regulations.
Make sure that the product is discarded through or via
your municipal recycling collection centre.
(Fig. 5)
562 - 004 - 20.03.2019 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna WDC 225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna WDC 225 in the language / languages: All languages as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info