518172
22
Zoom out
Zoom in
Previous page
1/48
Next page
4.
6.
22 – Operating the ma ine
PROGRAMMING
The Programming function on your machine makes
it possible to create stitches with your own personal
settings and to combine stitches and letters into stitch
programs. You can add up to 40 stitches and letters
in the same program. Save your own stitches and
programs in My Stitches and recall them any time you
like.
All stitches in your sewing machine are programmable
except for buttonholes, darning, button sewing and
bartacks.
Programming Mode
“Husqvarna” and “VIKING” are in the same program.
“Husqvarna” and “VIKING” have been programmed separately.
Create a Stitch Program
1. Press the PROG button to open the mode for
Programming.
2. The stitch menu which was previously selected will be
kept when entering the Programming mode. To change
the stitch menu, press the Stitch Menu button and select
another stitch menu by using the arrow buttons.
3. Press the number of the stitch you wish to use. The
stitch will appear in Programming Mode.
4. Press the number of the next stitch and it will appear to
the right of the last entered stitch.
Note: Two numbers are displayed above the stitch program on the left
side of the GraphicDisplay. The À rst number is the position of the
selected stitch in the program. The second number, put in brackets, is
the total number of stitches in the program. The number above the
stitch program on the right side of the GraphicDisplay is the number
of the selected stitch.
Add Letters
5. Press the Font Menu button. Use the arrow buttons to
select a font and press OK. The machine will show the
upper case alphabet in Programming Mode.
6. Use the arrow buttons to select a letter and press OK to
add the letter to the program.
7. To switch to a lower case alphabet or numbers press the
Shift button.
About Programming Letters
Both upper and lower case letters will be stitched with a
7 mm stitch width. If there are letters going below the
baseline included in the program (e.g. j, p, y) the height of
the uppercase letters will be reduced.
All text to be sewn out on the same project, should be in
the same program to ensure the letters are sewn out in the
same height.
For instance, a name and an address should be in the same
program with a STOP after the name.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info