518172
20
Zoom out
Zoom in
Previous page
1/48
Next page
20 – Operating the ma ine
SEWING MODE
Sewing Mode is the À rst view on the GraphicDisplay after you
turn on the machine. Here you will À nd all the basic information
you need to start sewing. This is also the menu where you adjust
the settings of your stitch. Straight stitch is selected by default.
1. Recommended needle for the selected fabric.
2. Recommended presser foot for the selected stitch.
3. The sewing speed is indicated by three levels shown on the
GraphicDisplay. Reduce or increase the speed by pressing
the SPEED button.
4. The fabric and sewing technique selected on the Exclusive
SEWING ADVISOR™ feature.
5. Recommended thread tension for the selected fabric and
stitch.
6. The selected stitch, both illustrated and displayed by
number.
7. Stitch length. Reduce or increase the stitch length by
pressing the Stitch Length – and + buttons.
8. Needle position is shown instead of stitch width when
straight stitch is selected. Change the needle position by
pressing the Stitch Width – and + buttons.
9. Indicates that the function Mirror side to side is activated.
10. When sewing a manual buttonhole or the darning program
the reverse icon is shown to indicate that you need to press
the reverse button when the buttonhole columns or the
darning stitch are sewn to the desired length.
11. Stitch density is shown instead of stitch length when a
buttonhole, bartack or darning stitch is selected or when
a satin stitch is selected and the Alternate View button is
pressed. Reduce or increase the stitch density by pressing
the Stitch Length – and + buttons.
12. Stitch width. Reduce or increase the stitch width by
pressing the Stitch Width – and + buttons.
13. Buttonhole size indication when using the Sensor One-
Step Buttonhole Foot. Set the size of the button by
pressing the up and down arrow buttons.
14. Recommendation to use stabilizer under your fabric.
15. The icon for lowering the feed teeth is shown when free
motion is activated or sewing on buttons is selected.
16. Set the number of stitches to sew on the button by
pressing the up and down arrow buttons.
17. Recommendation to use the multipurpose tool/button
reed when sewing on a button. Place the thin end of the
multipurpose tool/button reed under the button when
sewing on light fabrics. Use the thick end for heavier
fabrics.
Sensor One-Step Buttonhole
Normal Sewing Mode, Straight stitch
Manual Buttonhole
Sewing on button
Normal Sewing Mode, Decorative stitch
1
2
3
4
5
6
7
8
11
12
13
14
10
15
16
17
9
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info