518172
12
Zoom out
Zoom in
Previous page
1/48
Next page
12
3
4
A
B
C
12 – G ting Ready to Sew
NEEDLE THREADER
The needle must be in the up position to use the built-in
needle threader. We also recommend lowering the presser
foot.
1. Use the handle to pull the needle threader all the way
down, catching the thread under the guide (A).
2. Push back to bring the needle threader forward until the
metal Á anges cover the needle. A small hook will pass
through the needle eye (B).
3. Place the thread under the Á anges in front of the needle,
so the thread catches into the small hook (C).
4. Let the needle threader gently swing back. The hook
pulls the thread through the needle eye and forms a loop
behind the needle. Pull the thread loop out behind the
needle.
5. Place the thread under the presser foot.
Note: The needle threader is designed to be used for size 70-120
needles. You cannot use the needle threader for size 60 needles or
smaller, the wing needle, twin needle, triple needle or when the Sensor
One-Step Buttonhole Foot is on. There are also some other optional
accessories that require manual threading of the needle.
When threading the needle manually, make sure that the
needle is threaded from front to back. The white presser
foot ankle makes it easy to see the eye of the needle. The
bobbin case cover can be used as a magnifying glass.
CUTTING THE THREAD
Once you have À nished sewing, cut the threads by raising
the presser foot and pulling the threads from the back
to the front into the thread cutter on the left side of the
machine.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info