Manual Husqvarna TR430 (page 24 of 60) (English, German, Dutch, French, Italian, Spanish)

477663

Zoom out

Zoom in

1/60

Tilling

a. Release the depth stake pin (fig. 10 - inset c). Pull the

depth stake up for increased tilling depth. Place depth

stake pin in hole of depth stake to lock in position (fig.

10 - inset C).

b. Place shift lever indicator (fig. 10 - inset A) in the (

)

(tilling) position.

c. To start tiller movement, push down on the drive control

release and squeeze the drive control lever. Tines and

wheels will both turn.

d. Move throttle control (fig. 9) to "FAST" for deep tilling.

For cultivating move throttle control to desired speed.

WARNING!

Always release drive control lever before moving shift lever

into another position. Releasing the drive control lever will

disengage the drive control release.

Tilling hints

Tilling is digging into, turning over and breaking up packed

soil before planting. Loose, unpacked soil helps root growth.

Best tilling depth is 4" to 6".

Soil conditions are important for proper tilling. Tines will not

readily penetrate dry, hard soil which may contribute to ex-

ces sive bounce and difficult handling of your tiller. Hard soil

should be moistened before tilling: however, ex treme ly wet

soil will "ball-up" or clump during tilling. Wait until the soil is

less wet in order to achieve the best results.

For easier handling of your tiller, leave about 8 inches of untilled

soil between the first and second tilling passes. The third

pass will be between the first then second and etc. (fig. 11).

Do not lean on the handle. This takes weight off the wheels

and reduces traction. To get through a really tough section

of sod or hard ground, apply upward pressure on handle or

lower the depth stake.

321

Fig ure 11

Tilling

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TR430 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna TR430 Manual

Product: