579239

Husqvarna TC 338 Manual

52
Zoom out
Zoom in
Previous page
1/120
Next page
52
5
NORMAL STARTING (32°F/0°C and above)
1. Move throttle control (2) to fast position ( ).
2. Perform procedures outlined in "SmartSwitch IGNITION
UNLOCK" as previously described.
3. While the SSI button (C) is flashing green, press and release
the SSI button once more to start the engine.
• Once engine starts, the attachments and ground drive
can now be used. If the engine does not accept the load,
restart the engine and allow it to warm up for one minute.
• Leave throttle control in fast position (
) while mowing.
NORMALES STARTEN (0°C/32°F) und wärmer)
1. Stellen Sie den Gashebel (2) in die Schnellfahrposition ( ).
2. Führen Sie die zuvor beschriebenen Prozeduren in Abschnitt
“SmartSwitch ZÜNDUNG ENTRIEGELN” durch.
3. Wenn die SSI Taste (C) grün blinkt, drücken Sie die SSI Taste
einmal und lassen sie sofort wieder los, um den Motor zu
starten.
• Wenn der Motor gestartet ist, sind Anbauwerkzeuge und
Fahrantrieb einsatzbereit. Wenn der Motor überlastet ist
und sich ausschaltet, lassen Sie ihn erneut an und lassen
Sie ihn eine Minute lang warm laufen.
• Lassen den Gashebel beim Mähen in der Schnellfahrposition
(
).
DÉMARRAGE normal (0 °C et plus)
1. Mettre la commande des gaz (2) en position rapide ( ).
2. Suivre les procédures décrites précédemment dans la section
« DÉVERROUILLAGE DE L’ALLUMAGE SmartSwitch ».
3. Lorsque le bouton SSI (C) clignote en vert, appuyer et relâcher
le bouton SSI une autre fois pour démarrer le moteur.
• Lorsque le moteur démarre, les accessoires et la commande
d’entraînement peuvent maintenant être utilisés. Si le moteur
n’accepte pas la charge, redémarrer le moteur et le laisser
chauffer pendant une minute.
• Laisser la commande des gaz en position rapide (
) pendant
la tonte.
ARRANQUE NORMAL (0 °C/32 °F y superior)
1. Desplace el control del acelerador (2) a la posición rápida ( ).
2. Siga los procedimientos indicados en “DESBLOQUEO DEL
ARRANQUE CON SmartSwitch”.
3. Cuando el botón SSI (C) parpadee en verde, pulse y suelte
el botón SSI una vez más para arrancar el motor.
• Cuando arranque el motor, ya puede utilizar los accesorios
y la transmisión a las ruedas. Si el motor no acepta la
carga y se apaga, vuelva a arrancarlo y espere a que se
caliente durante un minuto.
• Deje el control del acelerador en la posición rápida (
)
mientras corta el césped.
AVVIAMENTO NORMALE (0 °C/32 °F e superiori)
1. Portare il comando acceleratore (2) nella posizione veloce
( ).
2. Eseguire le procedure descritte in precedenza nella sezione
“SBLOCCO ACCENSIONE SmartSwitch”.
3. Mentre sul pulsante SSI (C) lampeggia la spia verde, premere
e rilasciare il pulsante SSI un’altra volta per avviare il motore.
• Una volta acceso il motore, è possibile utilizzare gli accessori
e la trasmissione con ruota portante. Se il motore non
accetta il carico, riavviare il motore e attendere un minuto
che si scaldi.
• Durante le operazioni di falciatura lasciare il comando
acceleratore nella posizione veloce (
).
NORMAAL STARTEN (32°F/0°C en hoger)
1. Zet de gashendel (2) in de snelle stand ( ).
2. Voer de procedures in “DE SmartSwitch-ONTSTEKING
ONTGRENDELEN” uit zoals eerder beschreven.
3. Druk terwijl de SSI-toets (C) groen knippert nogmaals op de
SSI-toets en laat hem los om de motor te starten.
• Zodra de motor gestart is, kunnen de hulpstukken en de
aandrijving worden gebruikt. Als de motor de belasting
niet accepteert, start de motor dan opnieuw en laat hem
gedurende een minuut warmlopen.
• Laat de gashendel in de snelle stand (
) staan terwijl u
rijdt.
C
2
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TC 338 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TC 338 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info