733952
20
Zoom out
Zoom in
Previous page
1/116
Next page
20
TO ADJUST THE SEAT
Lift seat up and remove seat adjustment knob (A).
Loosen seat adjustment knob (B).
NOTE: Do not remove seat adjustment knob (B).
NOTE: Seat must be set until you can push the brake and
forward/reverse pedals down.
Move seat to necessary position, line up the hole in the seat
pan for seat adjustment knob (A) with the hole in the seat.
Install and tighten seat adjustment knob (A).
Tighten seat adjustment knob (B).
SO STELLEN SIE DEN SITZ EIN
Heben Sie den Sitz an, und entfernen Sie Sitzeinstellknopf
(A).
Lösen Sie Sitzeinstellknopf (B).
HINWEIS:
Entfernen Sie nicht Sitzeinstellknopf (B).
HINWEIS:
Der Sitz muss so eingestellt sein, dass Sie das
Bremspedal und die Vorwärts-/Rückwärtspedale betätigen
können.
Bringen Sie den Sitz in die erforderliche Position. Richten
Sie die Bohrung in der Sitzschale für Sitzeinstellknopf (A) an
der Bohrung im Sitz aus.
Drehen Sie Sitzeinstellknopf (A) ein und ziehen ihn an.
Ziehen Sie Sitzeinstellknopf (B) an.
POUR RÉGLER LE SIÈGE
Soulevez le siège et déposez le bouton de réglage du siège
(A).
Desserrez le bouton de réglage du siège (B).
REMARQUE : Ne déposez pas le bouton de réglage du siège
(B).
REMARQUE :
Le siège doit être réglé de manière à pouvoir
enfoncer les pédales de frein et de marche avant/arrière.
Déplacez le siège dans la position requise, alignez le trou
du support de siège pour le bouton de réglage du siège (A)
avec le trou du siège.
Installez et serrez le bouton de réglage du siège (A).
• Serrez le bouton de réglage du siège (B).
A
B
Keys
Schlüssel
Clés
Llaves
Chiavi
Sleutels
Slope Sheet
Hang-Blatt
Tôle inclinée
Hoja de pendientes
Foglio inclinato
Hellingsschema
Battery
Batterie
Batterie
Batería
Batteria
Accu
Bolts
Bolzen
Boulons
Pernos
Bulloni
Bouten
Nuts
Muttern
Écrous
Tuercas
Dadi
Moeren
Oil Drain Tube
Ölablassleitung
Bouchon de vidange d’huile
Tubo de drenaje del aceite
Tubo di scarico olio
Olieaftapslang
Unassembled Parts
Before the tractor can be used certain parts must be as-
sem bled, which for transportation reasons are enclosed in
the packing.
Nicht montierte Teile
Vor der Anwendung des Aufsitzmähers müssen gewisse
Teile eingebaut werden, die aus Transportgründen in der
Verpack-ung lose beigefügt sind.
Pièces non-assemblées
Avant d'utiliser la tondeuse autoportée, certains éléments
livrés dans l'emballage doivent être montés.
Partes no montadas
Antes de poder utilizar el tractor, hay que montar algunas
piezas que, por razones de transporte, van empaquetadas
en el embalaje.
Componenti non assemblati
Prima di usare il trattore, montare alcune parti che per ragioni
di trasporto sono confezionate a parte.
Afzonderlijke onderdelen
Voordat de traktor gebruikt kan worden, moeten sommige
onderdelen worden gemonteerd, die vanwege het trans port
apart verpakt zijn in de emballage.
2. Assembly. 2. Montage. 2. Montage.
2. Montaje. 2. Montaggio. 2. Montering.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TC 238TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TC 238TX in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info