733997
9
Zoom out
Zoom in
Previous page
1/32
Next page
Most chainsaw accidents occur when the saw
chain touches the operator. You must use
approved personal protective equipment during
operation. Personal protective equipment does not
give you full protection from injuries but it
decreases the degree of injury if an accident
occurs. Speak to your servicing dealer for
recommendations about which equipment to use.
Your clothing must be close-fitting but not limit your
movements. Regularly do a check of the condition
of the personal protective equipment.
Use an approved protective helmet.
Use approved hearing protection. Long-term
exposure to noise can result in permanent damage
to the hearing.
Use protective glasses or a face visor to decrease
the risk of injury from thrown objects. The product
can throw objects, such as wood chips, small
pieces of wood and more, at large force. This can
result in serious injury, especially to the eyes.
Use gloves with saw protection.
Use pants with saw protection.
Use boots with saw protection, steel toe-cap and
non-slip sole.
Always have a first-aid kit with you.
Risk of sparks. Keep fire extinguishing tools and a
shovel near to prevent forest fires.
Safety devices on the product
WARNING: Read the warning
instructions that follow before you use the
product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. Refer to
Maintenance and checks of the safety devices on
the product on page 19
.
If the safety devices are defective, speak to your
Husqvarna servicing dealer.
Functions of the user interface
The user interface includes the start/stop button, the
SavE button, the battery status and the warning
indicator. The warning indicator flashes if the chain
brake is engaged or if there is a risk of overload. The
overload protection temporarily stops the product and
you cannot use the product until the temperature
decreases. If the warning indicator shows a solid light,
speak to your servicing dealer.
For more information about the user interface, refer to
Product overview on page 2
.
The automatic stop function
The product has an automatic stop function that stops
the product if you do not use it for 3 minutes.
Note: If the chain brake is engaged, the product
stays on for 30 minutes.
Chain brake and front hand guard
Your product has a chain brake that stops the saw
chain if you get a kickback. The chain brake decreases
the risk of accidents but only you can prevent them.
WARNING: Do not engage in
situations where there is a risk of kickback.
Be careful when you use your product and
make sure that the kickback zone of the
guide bar does not touch an object.
The chain brake engages manually by your left hand or
automatically by the inertia release mechanism. Push
the front hand guard forward to engage the chain
brake manually. This movement starts a spring-loaded
mechanism that stops the drive sprocket.
1036 - 005 - 29.06.2020
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna T540i XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna T540i XP in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna T540i XP

Husqvarna T540i XP User Manual - German, Dutch, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info