733997
7
Zoom out
Zoom in
Previous page
1/32
Next page
Maintain a firm grip, with thumbs and fingers
encircling the chain saw handles, with both hands
on the saw and position your body and arm to allow
you to resist kickback forces. Kickback forces can
be controlled by the operator, if proper precautions
are taken. Do not let go of the chain saw.
Do not overreach and do not cut above shoulder
height. This helps prevent unintended tip contact
and enables better control of the chain saw in
unexpected situations.
Only use replacement guide bars and saw chains
specified by the manufacturer. Incorrect
replacement guide bars and saw chains may cause
chain breakage and/or kickback.
Follow the manufacturer’s sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
SAVE THESE INSTRUCTIONS.
General safety instructions
WARNING: Read the warning
instructions that follow before you use the
product.
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. It is very important that you read
and understand the contents of this operator’s
manual.
Do not change the product without an approval
from the manufacturer. Do not use a product that
has been changed by others and always use
original accessories. Changes that are not
approved from the manufacturer can result in
serious injury or death to the operator or others.
Long term inhalation of chain oil fumes and
sawdust can cause health problems.
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with
medical implants to turn to their physician and the
medical implant manufacturer before operating this
product.
Safety instructions for operation
WARNING: Read the warning
instructions that follow before you use the
product.
The information in this operator's manual not an
alternative to professional knowledge and
experience. If you do not feel sure about how to
operate this product, turn to a person with
professional knowledge and experience.
Turn to your servicing dealer or Husqvarna if you
have questions about the operation of the product.
We can give you information about how to operate
your product correctly and safely. Go to a training
class in chainsaw operation if possible. Your
servicing dealer, forestry school or your library can
give you information about training materials and
classes that are available.
This product has a increased risk of losing control.
Only persons who have special training in cutting
and working technique must operate this product in
a tree. The operator must have safety equipment
such as a lift, ropes and safety harness. Regular
chainsaws are recommended for all work at ground
level.
Follow instructions on special cutting and working
techniques to decrease the risk of injury. Do not do
work in a tree unless you have professional training
for such work. This training includes safe climbing
techniques and work positions. You must learn how
to use equipment such as harnesses, ropes, belts,
climbing irons and carabiners.
Do not cut with the kickback zone at the guide bar
tip.
Do not touch a rotating saw chain. It can cause
serious injuries of death.
Do not try to catch falling sections or make cuts if
the operator is only attached with one rope. Always
use two safety ropes.
During felling operations, lift your hearing
protection immediately when the sawing is
complete. It is important that you hear sounds and
warning signals.
You must understand the effects of kickback and
how to prevent them before you use this product.
See
Kickback information on page 14
and
Common questions about kickback on page 14
for
instructions.
Do not use a product, battery or battery charger
that is defective.
Do not use the product if you are tired, ill or while
under the influence of alcohol, drugs or medicine.
Do not use the product if you are in a condition that
can have a negative effect on your vision,
alertness, coordination or judgment. The risk of
being tired increases before the end of a work
period.
Do not start a product unless the guide bar, saw
chain and all covers are assembled correctly. If not,
the drive sprocket can come loose and cause
serious injuries. See
Assembly on page 12
for
instructions.
1036 - 005 - 29.06.2020
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna T540i XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna T540i XP in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna T540i XP

Husqvarna T540i XP User Manual - German, Dutch, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info