Manual Husqvarna ST 427T (page 16 of 200) (English, German, Dutch, French, Italian, Spanish)

734468

Zoom out

Zoom in

1/200

• Always adapt the speed of the product to the snow

situation and adjust the speed with the drive speed

control lever. Make sure that the product throws

snow evenly.

• It is easier and more efficient to remove snow

immediately after it falls.

• Always throw snow downwind whenever possible.

• On flat surfaces, like asphalt roads, raise the skid

plates up to 5-6 mm (0.2-0.25 in) off the ground.

• The scraper bar is reversible. When it becomes worn

almost to the edge of the housing, reverse it.

Replace the scraper bar if it is damaged, or if both

sides are worn.

• Do not dispatch the chute deflector if it is clogged.

• If the product does not move forward due to

unforeseen circumstances, release the drive

engagement immediately or move the ON/OFF key

to the "OFF" position.

Maintenance

Introduction

When the product is in use, bolts can loosen and

components can become worn. This can cause

malfunction like incorrect tolerance clearance, increased

oil consumption, or misalignment of various

components. Do regular maintenance on the product to

prevent malfunction.

Maintenance schedule

Maintenance Daily At 15 hour inter-

vals

At 20 hour inter-

vals

At 40 hour inter-

vals

At 100 hour inter-

vals

Tighten nuts and

screws X

Do a check of the

engine oil level X

Replace the en-

gine oil X

Do a check of

and adjust the

track tension (on-

ly ST 424T/427T/

430T )

Make sure that

there are no fuel

or oil leaks

Remove obsta-

cles in the auger X

Lubricate the in-

terlock catches 1X

Lubricate the ca-

ble attachments2X

Do a check of the

tire pressure (on-

ly ST

424/427/430 )3

1Also lubricate at the beginning of each season.

2Also lubricate at the beginning of each season.

3See Technical data for correct tire pressure.

16 891 - 005 - 08.01.2020

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 427T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 427T Manual

Product: