734467
28
Zoom out
Zoom in
Previous page
1/200
Next page
Problem Possible cause Solution
Loss of traction drive/
slowing of drive speed
Loss of snow discharge or
slowing of snow discharge
The belt slips. Adjust the cable. Adjust the belt.
The belt is worn. Check / replace the belt. Adjust the
pulley.
The belt is off the pulley. Check / reinstall the belt. Adjust the
pulley.
The chute deflector is clogged. Clean the chute deflector.
Foreign objects clog the augers. Remove the debris or the foreign ob-
ject from the augers.
The shear pin is broken. Replace the broken shear pin.
Excessive snow and ice build up in between
continous track components.
Remove snow and ice build up from
in between continous track compo-
nents.
The lights are not on (if so
equipped)
The engine is not running. Start the engine.
The cable connection is loose. Do a check of the cable connections
at the engine and the lights.
The LED is burnt out. Replace the LED light module. Indi-
vidual LEDs can not be replaced.
The fuse is blown. Replace the fuse. Make sure that
there is no short circuit.
The chute rotator is diffi-
cult to move
There is debris in the chute rotator mechanism. Clean the internal parts of the chute
rotator mechanism.
The cables are kinked or damaged. Make sure that the cables are not
kinked. Replace the cables that are
damaged.
The release cable needs adjustment. Adjust the release cable.
The product turns to one
side
The tire pressure is not equal. Adjust the tire pressure and fill the
tire.
The product drives with only one wheel. Inspect the tire lock pin.
Uneven sled adjustment. Adjust the skid plates and the sledge.
Uneven skid plates adjustment. Adjust the skid plates and the sledge.
Transportation, storage and disposal
Transportation and storage
For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
Always use approved containers for storage and
transportation of fuel.
Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
Safely attach the product during transportation to
prevent damage and accidents.
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Keep the product in a dry and frost free area.
Charge the battery during long-term storage.
Examine and clean the battery terminals before long-
term storage.
28 891 - 005 - 08.01.2020
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna ST 424T, at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 424T, in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info