477694

Husqvarna Sneeuwmachine ST 121E Manual

11
Zoom out
Zoom in
Previous page
1/68
Next page
11
3
9
4
10
11
1
2
7
8
6
5
Despliegue del asa
1. Retire los sujetacable provisionales (1) que fijan los
cables en los orificios de ajuste del asa.
2. Suelte las palancas de ajuste del asa (2) a ambos lados.
3. Levante el asa del operador hasta la altura que desee y
cierre la palanca de ajuste cerciorándose que el pasador
de posición (3) en el asa inferior se enganche en uno
de los tres orificios (4) del asa superior.
4. Levante y baje ligeramente el asa (5) para comprobar
que esté bloqueada en su posición.
NOTA: Si el asa no está bien sujeta con las palancas de
ajuste cerradas, apriete las tuercas del asa (8) hasta que
la note sujeta.
5. Retire el cartón del asa de arranque con bobinador (6)
e introduzca la cuerda del bobinador por la guía (7).
6. Presione e introduzca dos cables de rotador (9) y un
cableado (10) en las tres fijadores para cable (11).
De hendel uitklappen
1. Verwijder de tijdelijke kabelklemmen (1) waarmee de
kabels op de instelgaten voor de handgreep worden
vastgehouden.
2. Maak de afstelhendels van de handgreep (2) los aan
beide zijden.
3. Til de bedieningshandgreep op tot de gewenste hoogte
en sluit de afstelhendel door de positioneringspin (3) op
de onderste handgreep in één van de drie gaten (4) op
de bovenste handgreep te steken.
4. Trek de handgreep (5) enigszins omhoog en omlaag om te
controleren of de handgreep op zijn plaats vergrendeld is.
OPMERKING: Als de handgreep niet stevig aanvoelt
met de afstelhendels gesloten, draai de moeren van de
afstelhendel (8) dan aan tot de handgreep stevig aanvoelt.
5. Verwijder het karton van de terugloopstarthandgreep (6)
en voer de terugloopkabel door de kabelgeleider (7).
6. Klik de twee rotorkabels (9) en een bedradingsboom
(10) in de drie kabelklemmen (11).
Apertura del manubrio
1. Togliere i ferma cavi provvisori (1) tenendo i cavi all'altezza
dei fori di regolazione della maniglia.
2. Rilasciare le leve di regolazione della maniglia (2) su
entrambi i lati.
3. Sollevare la maniglia dell'operatore all'altezza desiderata
e chiudere la leva di regolazione verificando che il perno
di posizionamento (3) sulla parte inferiore della maniglia
si agganci ad uno dei tre fori (4) sulla parte superiore
della maniglia.
4. Muovere leggermente verso l'alto e il basso la maniglia
(5) per verificare che sia inserita correttamente.
NOTA: In caso contrario, se la maniglia non sembra
fissata in modo sicuro con le leve di regolazione chiuse,
serrare i dadi della maniglia di regolazione (8) fino a fissare
completamente la maniglia.
5. Togliere il cartone dalla maniglia della fune di avviamento
autoavvolgente (6) e fare passare la fune sull'apposita
guida (7).
6. Fissare i due cavi rotore (9) e il il fascio cavi (10) nelle
tre apposite clip (11).
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Sneeuwmachine ST 121E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Sneeuwmachine ST 121E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 18,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info