518170

Husqvarna SCANDINAVIA 400 Manual

24
Zoom out
Zoom in
Previous page
1/64
Next page
24
Functions and InfoDisplay
Look through the program
If you have programmed several of
the memories you can press FUNC
for PROG or REP. Use the M button
to select the following memory and
then advance with the buttons
.
The memory last used will appear on
the display when you select PROG or
REP.
CLR - Deleting stitches
If you wish to delete a certain stitch
within the program:
1. In the PROG position, use one of
the buttons
until the actual
stitch number is displayed.
2. Touch CLR. Now the stitch and
everything to the right of it will be
deleted.
3. If you wish to delete the whole
program, touch the FUNC button
to return to PROG. The machine
will be positioned at the À rst
programmed stitch.
4. Touch CLR. CLR deletes the
program of stitches in the selected
menu.
If you by mistake touch CLR, simply
touch CLR again to bring back the
balance of your program as long as
you have not used another button.
When the program memory is empty
the stitch length and width is shown as
0.0/0.0 on the display.
Letters are deleted in the same way.
Darning and taper satin
stitches
The stitches 11-12 can only be selected
in NORM position. They can not
be programmed or combined but
are set individually and automatically.
For stitches 11 and 12 there are stitch
memories where the number of
stitches, length or width changes are
stored.
1. Sew until the stitch has reached the
desired length.
2. Touch the
button. The machine
now completes the stitch.
3. When you have the result you wish,
touch STOP.
4. The stitch will now repeat in
succession and the machine will
stop automatically when the stitch
is completed.
If you wish to sew another stitch and
then return to your stitch, you only
select this stitch and touch STOP.
The repeated stitch is retained even if
you switch off the machine.
If you attempt to program these
stitches in the PROG position, PROG
is Á ashing to indicate that this is not
possible.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info