518170

Husqvarna SCANDINAVIA 400 Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
23
Functions and InfoDisplay
Mirror images
Mirror image side to side .
In NORM and PROG only the stitch selected is mirrored.
The entire program is mirrored in REP. You can also
mirror the width when you wish to change the straight
stitch needle position, e.g. from left to right.
When mirror image side to side is selected the symbol
will be shown on the Infodisplay.
Mirror image end to end .
In NORM and PROG only the stitch selected is mirrored.
The entire program is mirrored in REP.
When mirror image end to end is selected the symbol
will be shown on the Infodisplay.
Programming STOP
The STOP button is used to conclude a stitch program, i.e. the machine fastens
the thread and stops automatically when the sewing of your stitch or letter
combination is completed. The symbol
is displayed to the very right.
You can continue your programming even after having pressed STOP. In
REP position the
is displayed. Then, when sewing, the machine stops
automatically and fastens the thread in every position where you have
programmed STOP and at the end of the stitch combination. Just press
the foot control again and the machine will sew the rest of what you have
programmed.
If you wish to repeat your stitch combination without having the machine stop,
press the STOP button to cancel the STOP in REP position.
The symbol
will disappear from the Infodisplay.
(If you should forget to enter STOP while in PROG it is also possible to use
the STOP button in REP position. The STOP will remain until you select
another function or stitch.)
If you have programmed STOP at the end of your program and then mirror
the entire program in length, the STOP will be placed at the beginning. Use the
button
and advance to the next stitch to avoid STOP.
If you cancel the STOP button when sewing embroideries, the machine will
sew the entire embroidery without stopping to change thread color.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SCANDINAVIA 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info