Manual Husqvarna Sappire 850 (page 13 of 48) (English)

610267

Zoom out

Zoom in

1/48

Getting ready to sew

Needle threader

The needle must be in the up position to use the built-in needle

threader. We also recommend lowering the presser foot.

1. Use the handle to pull the needle threader all the way down,

catching the thread under the guide (A).

2. Push back to bring the needle threader forward until the metal

ﬂ anges cover the needle. A small hook will pass through the

needle eye (B).

3. Place the thread under the ﬂ anges in front of the needle, so

the thread catches into the small hook (C).

4. Let the needle threader gently swing back. The hook pulls the

thread through the needle eye and forms a loop behind the

needle. Pull the thread loop out behind the needle.

5. Place the thread under the presser foot.

NOTE: The needle threader is designed to be used for size

70-120 needles. You cannot use the needle threader for

size 60 needles or smaller, the wing needle, twin needle,

triple needle or when the Sensor Buttonhole Foot is on.

There are also some other optional accessories that require

manual threading of the needle.

When threading the needle manually, make sure that the

needle is threaded from front to back. The white presser

foot ankle makes it easy to see the eye of the needle. The

bobbin case cover can be used as a magnifying glass.

Cutting the thread

Once you have ﬁ nished sewing, you can cut the threads by raising

the presser foot and draw the threads to the left side of the

machine through the thread cutter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Sappire 850 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Sappire 850 Manual

Product: