510448
42
Zoom out
Zoom in
Previous page
1/56
Next page
42
Basic sewing techniques
Manual Buttonholes
A buttonhole can also be sewn step by step without the Sensor
One-Step Buttonhole Foot connected. Use the reverse button to
set the length of the buttonhole.
1. Snap on Presser Foot C.
2. Place the fabric and stabilizer under the presser foot. Use the
markings on the left toe of the buttonhole foot to position
the garment edge. Place the edge of the garment at the
middle mark to have 5/8’’ (15 mm) from the edge to the
buttonhole.
3. Begin sewing the buttonhole. The sewing machine will sew
the left column in reverse. A reverse icon is shown on the
GraphicDisplay indicating that you need to press the Reverse
button to step to the next part of the stitch. When the
buttonhole has reached the desired length, press the Reverse
button. Your sewing machine will bartack the end and stitch
the right side.
4. Sew to the starting mark and press the Reverse button to sew
the second bartack. Keep the foot control depressed until the
buttonhole is À nished. The machine will stop automatically
when the buttonhole is complete.
1:0, 1:23-28 Buttonhole Stitches
Fabric: All types of fabric.
Select: The fabric you are using
and the Buttonhole technique (The
Exclusive SEWING ADVISOR™
feature selects a buttonhole suitable
for your fabric).
Use: Presser Foot C and the needle
recommended for your fabric.
Corded Buttonhole (Stretch fabrics)
When sewing buttonholes in stretch fabrics we recommend
cording the buttonhole to increase the stability and to keep the
buttonhole from stretching out.
1. Loop a piece of heavy thread or gimp cord over the À nger on
the back of Presser Foot C.
2. Stitch a buttonhole. Let the satin buttonhole columns stitch
over the cord.
3. Stop sewing before the last end of the buttonhole is sewn.
Lift the cord off the À nger and pull out the slack.
4. Cross the cord in front of the needle and stitch the end of the
buttonhole over the cord.
42


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-875-quilt

Reset search

  • How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 875 Quilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info