Manual Husqvarna SAPPHIRE 875 Quilt (page 41 of 56) (English)

510448

Zoom out

Zoom in

1/56

Basic sewing techniques

Sewing buttonholes

The buttonholes in your sewing machine are specially adjusted

for different kinds of fabric and garments. Look at the stitch

table on the last pages in this book to À nd descriptions of each

buttonhole.

The Exclusive SEWING ADVISOR™ feature will select the best

buttonhole and stitch settings for your fabric. Fabric should be

interfaced and/or stabilized where buttonholes are to be sewn.

Automatic One-Step Sensor Buttonholes

When you select a buttonhole stitch with the Sensor One-Step

Buttonhole Foot connected, you will be able to set the size of

the button on the GraphicDisplay using the up and down arrow

buttons. When sewing, your sewing machine automatically

sews the buttonhole long enough to À t the selected button size.

Because the Sensor One-Step Buttonhole Foot measures as it

sews, every buttonhole will be the same size.

NOTE: The buttonhole size will vary with the thickness

and style of your button. Always stitch a sample

buttonhole on scrap fabric À rst.

1. Attach the Sensor One-Step Buttonhole Foot.

2. Plug the cord into the socket above the needle area, behind

the light bulb.

3. Measure the button diameter using the button measuring

chart on the front of the machine.

4. Use the up and down arrow buttons to set the button size on

the GraphicDisplay. The size can be set between 0-50 mm.

5. Place the fabric and stabilizer under the Sensor One-Step

Buttonhole Foot. The measurement wheel can be raised by

lifting it, which makes it easier to place the fabric under the

presser foot. Use the markings on the left toe of the Sensor

One-Step Buttonhole Foot to position the garment edge.

Place the edge of the garment at the middle mark to have

5/8’’ (15 mm) from the edge to the buttonhole.

6. Before sewing, line up white area on the side of the red wheel

with the white marking line on the foot.

7. Step on the foot control. The Sensor One-Step Buttonhole

Foot lowers automatically. A straight stitch is sewn away

from you stabilizing the left buttonhole column, then the

satin column is sewn toward you. This is repeated for the

right column. The bartacks are also sewn automatically.

The arrows on the GraphicDisplay will show when each

part of the buttonhole is sewn and in what direction. Keep

the foot control depressed until the buttonhole is À nished.

The machine will stop automatically when the buttonhole is

complete.

1:0, 1:23, 1:25, 1:26, 1:27 Buttonhole Stitches

Fabric: All types of fabric.

Select: The fabric you are using and the

Buttonhole technique (The Exclusive

SEWING ADVISOR™ feature selects a

buttonhole suitable for your fabric).

Use: The Sensor One-Step Buttonhole Foot

and the needle recommended for your fabric.

How do I remove the temp plate to get small amounts of thread jammed Submitted on 24-9-2023 at 20:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 875 Quilt in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt User Manual - German - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - Dutch - 56 pages

Husqvarna SAPPHIRE 875 Quilt User Manual - French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SAPPHIRE 875 Quilt Manual

Product: