518162

Husqvarna SAPPHIRE 870 Manual

37
Zoom out
Zoom in
Previous page
1/48
Next page
37
3
Basic sewing techniques
Sewing buttonholes
The buttonholes in your sewing machine are specially adjusted
for different kinds of fabric and garments. Look at the stitch
table on the last pages in this book to fi nd descriptions of each
buttonhole.
The Sewing Advisor will select the best buttonhole and stitch
settings for your fabric. Fabric should be interfaced and/or
stabilized where buttonholes are to be sewn.
Automatic One-Step Sensor Buttonholes
When you select a buttonhole stitch with the Sensor Buttonhole
Foot connected, you will be able to set the size of the button on
the GraphicDisplay using the up and down arrow buttons. When
sewing, your sewing machine automatically sews the buttonhole
long enough to fi t the selected button size. Because the Sensor
Buttonhole Foot measures as it sews, every buttonhole will be the
same size.
NOTE: The buttonhole size will vary with the thickness
and style of your button. Always stitch a sample
buttonhole on scrap fabric fi rst.
1. Attach the Sensor Buttonhole Foot.
2. Plug the cord into the socket above the needle area, behind
the light bulb.
3. Measure the button diameter using the button measuring
chart on the front of the machine.
4. Use the up and down arrow buttons to set the button size on
the GraphicDisplay. The size can be set between 0-50 mm.
5. Place the fabric and stabilizer under the Sensor Buttonhole
Foot. The measurement wheel can be raised by lifting it,
which makes it easier to place the fabric under the presser
foot. Use the markings on the left toe of the Sensor
Buttonhole Foot to position the garment edge. Place the edge
of the garment at the middle mark to have 5/8’’ (15 mm)
from the edge to the buttonhole.
6. Before sewing, line up white area on the side of the red wheel
with the white marking line on the foot.
7. Step on the foot control. The Sensor Buttonhole Foot
lowers automatically. A straight stitch is sewn away from you
stabilizing the left buttonhole column, then the satin column
is sewn toward you. This is repeated for the right column.
The bartacks are also sewn automatically. The arrows on the
GraphicDisplay will show when each part of the buttonhole is
sewn and in what direction. Keep the foot control depressed
until the buttonhole is fi nished. The machine will stop
automatically when the buttonhole is complete.
1:0, 1:23, 1:25, 1:26, 1:27 Buttonhole Stitches
Fabric: All types of fabric.
Select: The fabric you are using and the
Buttonhole technique (The Sewing Advisor
selects a buttonhole stitch suitable for your
fabric).
Use: The One-step Sensor Buttonhole Foot
and the needle recommended for your fabric.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 870 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info