518162
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
Basic sewing techniques
Darning and mending
Darning a small hole or a tear before it becomes larger can save a
garment. Choose a ne thread in a color as close to your garment
as possible.
1. Place the fabric in position under the presser foot.
2. Start sewing above the hole and over it.
3. Once over the hole, press the Reverse button. Continue
sewing. The machine sews back and forth across the hole 14
times and then stops.
4. To repeat the stitch with the same size, press the STOP
button. Reposition your fabric, then step on the foot control
to sew again. The stitch will now repeat the same size darning
square. The machine will stop automatically when the stitch is
completed.
Sewing hems in heavy fabric
When sewing over seams in extra heavy fabric or a blue jeans
hem, the foot can tip as the machine climbs over the seam. Use
the clearance plate to balance the height of the presser foot as
you sew.
One side of the plate is thicker than the other. Use the side that
suits the thickness of the seam best.
1:21 Darning Stitch
Fabric: All types of fabric.
Select: The fabric you are using and
stitch no. 1:21.
Use: Presser Foot A and the needle
recommended for your fabric.
Blind hem
The blind hem creates an invisible hem on garments. There are
two types of blind hem; one is recommended for medium to
heavy stretch fabric, the other for medium to heavy woven fabric.
Fold the fabric as illustrated. Make sure the folded edge of the
fabric follows the inside of the right “toe” of Blind Hem Foot D.
The left swing of the needle should just catch the edge of the
folded fabric.
If necessary, adjust the stitch width as needed to barely “catch”
the fold.
NOTE: The blind hem technique is not recommended for
light weight fabric or leather/vinyl. If you select the blind
hem and light woven, light stretch or leather and vinyl you
will hear a beep and the technique will be unselected.
Woven medium/
heavy fabric
Stretch medium/
heavy fabric
1:16 Stretch Blind Hem Stitch
1:17 Woven Blind Hem Stitch
Fabric: Stretch medium/heavy or woven
medium/heavy
Select: The fabric you are using and the Blind
hem technique (The Sewing Advisor selects the
Blind Hem Stitch no. 1:16 or 1:17.
Use: Blind Hem Foot D and the needle
recommended for your fabric.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 870 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info