518161

Husqvarna SAPPHIRE 850 Manual

20
Zoom out
Zoom in
Previous page
1/48
Next page
20
870 Quilt
10
14
13
15
11 12
16 17 18
19
22
21
2423
20
25
Operating the machine
15. Navigator Arrow Buttons
Make your selections with the arrow buttons and confi rm your
selections or changes with the OK button.
Use the left/right arrow buttons to select stitches step by step in
numerical order within the selected stitch menu.
The arrow buttons are also used when programming to select
stitches within the program or to select letters to insert in the
program.
The up and down arrow buttons are also used to set the size of
a buttonhole and to set the number of stitches when sewing on
a button.
16. Stitch Menu
Press this button to select a stitch from any of the stitch menus
shown on the GraphicDisplay.
17. Font Menu
Press this button to open the Font Menu on the GraphicDisplay
to select a font.
18. Shift to upper-case, lower-case or
numbers
Press this button to shift to lower or upper-case or numbers when
programming letters.
19. Save to My Stitches
This button opens the menu where you can save your own
personal stitches or stitch programs. Press the button again to exit
the My Stitches mode.
20. Program Mode
Press this button to open the mode for programming. Press the
button again to exit the program mode.
21. SET Menu
Press this button to open the menu for machine settings. Make
changes and selections by using the arrow buttons (15). Press the
button again to exit the SET Menu.
22. Stitch Re-start (Only on 870 Quilt)
If you have stopped sewing in the middle of a stitch, touch Re-
start to start sewing at the beginning of the stitch again without
having to re-set any special settings you have made.
23. Mirror End to End (Only on 870 Quilt)
Press this button to mirror the selected stitch end to end. If
the button is pressed in Sew Out Mode for stitch programs, the
whole stitch program is mirrored. The change is visible on the
GraphicDisplay.
*Only on 870 Quilt
24. Mirror Side to Side
Press this button to mirror the selected stitch side to side. If the
button is pressed when straight stitch with left needle position
is selected, the needle position is changed from left to right. If
the button is pressed in Sew Out Mode for stitch programs, the
whole stitch program is mirrored. The change is visible on the
GraphicDisplay.
25. Exclusive Sewing Advisor
The Sewing Advisor sets the best stitch, stitch length, stitch
width, sewing speed, thread tension* and Sensor Foot Pressure
for the selected fabric and sewing technique. The stitch is
shown on the GraphicDisplay with presser foot, thread tension
(830/850) and needle recommendations. Press the buttons for the
fabric you are using and the sewing technique you wish to sew.
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-sapphire-850

Reset search

  • what is causing my stitches to gather when sewing two pieces of fabric together? Submitted on 14-10-2021 at 19:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 850 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info