Manual Husqvarna SAPPHIRE 850 (page 18 of 48) (English)

518161

Zoom out

Zoom in

1/48

850/830

870 Quilt

Operating the machine

1. Needle Stop Up/Down

Press this button to move the needle down or up. The setting of

the needle stop position is changed at the same time.

The upper LED next to the button is lit when needle up is

activated and the lower LED is lit when needle down is activated.

You can also tap the foot control to raise or lower needle. If

both the needle and the presser foot are in up position, only the

presser foot will be lowered when you tap the foot control.

2. Sensor Foot Up/Extra Lift

This button raises the presser foot to the up position. Press the

button once more and the presser foot will raise to an extra high

position, to make it easy to place and remove heavy or ﬂ uffy

fabrics and battings under the presser foot.

3. Sensor Foot Down/Pivot Position

Press this button and the presser foot will be completely lowered

and will ﬁ rmly hold the fabric. Press this button again to raise the

presser foot to pivot position or a ﬂ oating position over the fabric

for easier placement of the fabric.

The presser foot will be lowered automatically when you start

sewing. You can also tap the foot control to lower the presser

foot.

When you stop with the needle in the down position, the presser

foot is automatically lifted to pivot position. This function can be

turned off in the SET Menu.

4. Stop

STOP is used to conclude a stitch or to sew just one unit of

the stitch. Your sewing machine ties off the thread and stops

automatically when one stitch unit or stitch program has been

completed. The LED next to the button is lit when STOP is

activated. STOP is cancelled once you have used the function.

Press the button again if you wish to activate it once more.

TIP: If you want to repeat the STOP function for a stitch

unit several times in a row you can save the stitch with a

STOP at the end in a program.

5. Speed

All stitches in your sewing machine have a pre-set, recommended

sewing speed. Press the SPEED button or, on the 870 Quilt

model: +SPEED or –SPEED to increase or decrease the sewing

speed. For 830 and 850 there are three speed levels and for 870

Quilt there are ﬁ ve speed levels. The speed level is shown on the

GraphicDisplay. You cannot select a higher speed than the default

max speed for the selected stitch.

6. Fix

By using the FIX button you can lock the stitch at the beginning

and/or at the end. The LED next to the button is lit when FIX is

activated. Press the FIX button to turn off the function.

The FIX function is automatically activated when a stitch is

selected or when STOP, the Selective Thread Cutter* or Stitch

Restart* has been used. You can turn off the automatic FIX

function in the SET Menu.

7. Reverse

Reverse is pressed to sew in reverse. When the button is released,

your sewing machine sews forward. The LED on the button is lit

when reverse is activated.

For permanent reverse, press the button once before starting

to sew. Your sewing machine sews in reverse until you press the

button again.

8. Selective Thread Cutter (Only on 870 Quilt)

Press the button and your sewing machine cuts the top and

bobbin threads, raises the presser foot and the needle and

activates the FIX function. To cut before the needle moves to the

start position of next stitch, touch Selective Thread Cutter while

sewing. The LED next to the button starts ﬂ ashing, indicating

that a cut is requested.

9. Start/Stop (Only on 870 Quilt)

Press this button to run and stop the machine without the foot

control. Press the button once to begin sewing and press again to

stop sewing.

Function buttons

*Only on 870 Quilt

what is causing my stitches to gather when sewing two pieces of fabric together? Submitted on 14-10-2021 at 19:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 850 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SAPPHIRE 850 Manual

Product: