518160
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
Basic sewing techniques
Sewing zippers
The Zipper Foot E can be snapped on either the right or the left
of the needle, making it easy to sew both sides of the zipper. To
sew the other side of the zipper, reposition the Zipper Foot.
Move the needle position far left or far right to stitch close to the
zipper teeth or cording.
Center Zipper
1. Sew the two fabrics right sides together along the 5/8’’
(15 mm) seam line, stopping at the notch for the zipper
placement.
2. Baste the remaining seam where the zipper will be placed.
Press the seam open. Place the zipper right side to the pressed
open seam allowance, placing the zipper stop at the notch. Pin
the zipper on the right side so it stays in place.
3. Select straight stitch and move the needle position to the left.
Snap on the Zipper Foot E so the needle is on the left side
of the foot. Place fabric under the foot right side up with the
zipper foot on the right side of the zipper.
4. Begin stitching across the bottom, turn the fabric and stitch
the right side of the zipper to the top.
5. To avoid fabric shifting, sew the left side of the zipper in the
same direction. Snap on the Zipper Foot E so the needle is
on the right side of the foot. Move the needle position to the
right.
6. Begin stitching across the bottom, turn the fabric and stitch
the left side of the zipper sewing from the bottom to the top.
7. Remove the basting stitches.
NOTE: To adjust the position of the stitching line, adjust the
needle position with the stitch width buttons.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info