518160
38
Zoom out
Zoom in
Previous page
1/48
Next page
38
Basic sewing techniques
Step-by-Step Buttonholes
A buttonhole can also be sewn step by step without the Sensor
Buttonhole Foot connected. Use the reverse button to set the
length of the buttonhole.
1. Attach Presser Foot C.
2. Place the fabric and stabilizer under the presser foot. Use the
markings on the left toe of the buttonhole foot to position
the garment edge. Place the edge of the garment at the
middle mark to have 5/8’’ (15 mm) from the edge to the
buttonhole.
3. Begin sewing the buttonhole. The sewing machine will sew
the left column in reverse. When the buttonhole has reached
the desired length, press the Reverse button. Your sewing
machine will bartack the end and stitch the right side.
4. Sew to the starting mark and press the Reverse button to sew
the second bartack. Keep the foot control depressed until the
buttonhole is nished. The machine will stop automatically
when the buttonhole is complete.
5. Press the Stop button to repeat the buttonhole.
1:0, 1:23-28 Buttonhole Stitches
Fabric: All types of fabric.
Select: The fabric you are using
and the Buttonhole technique (The
Sewing Advisor selects a buttonhole
stitch suitable for your fabric).
Use: Presser Foot C and the needle
recommended for your fabric.
Corded Buttonhole (Stretch fabrics)
When sewing buttonholes in stretch fabrics we recommend
cording the buttonhole to increase the stability and to keep the
buttonhole from stretching out.
1. Loop a piece of heavy thread or perle cotton over the nger
at the back of the Sensor Buttonhole Foot or Presser Foot C.
2. Stitch a buttonhole. Let the satin buttonhole columns stitch
over the cord.
3. Stop sewing before the last end of the buttonhole is sewn.
Lift the cord off the nger and pull out the slack.
4. Cross the cord in front of the needle and stitch the end of the
buttonhole over the cord.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info