518159
12
Zoom out
Zoom in
Previous page
1/64
Next page
Instruction book Rose
12
Bobbin winding with the machine threaded
.
Make sure that the presser foot is up and the needle is in the highest position.
Note! Do not use a plastic presser
foot when bobbin winding.
1. Place your empty bobbin with the
small mark outwards on the
bobbin spindle on the front of the
machine.
2. Pull the thread from the needle
under the presser foot and to the
right over the thread guide (c).
3. Start from above and wind a few
turns of thread around the bob-
bin. Cut off the thread on the
thread knife (d).
4. Bring the bobbin spindle down.
Press the foot control. When the
bobbin winding is finished, the
bobbin will stop automatically.
Remove the bobbin, cut off the
thread and bring the bobbin
spindle up.
Note! We do not recommend
winding specialty threads such as
clear nylon or other stretchy threads
through the needle. Instead see
"Bobbin winding - vertical spool
pin" below.
1. Place an
empty bobbin
with the mark
outwards
on the bobbin
spindle on the
front of the machine.
2. Place the large spool
holder under the thread
on the spool pin.
3. Bring the thread under the
thread guide (a) and over thread
guide (b),then around thread
guide (c) as illustrated.
4. From above
wind a few
turns of
thread
around the
bobbin and
into the knife.
5. Bring the bobbin spindle
down. Press the foot control.
When the bobbin winding is
finished, the bobbin will stop
automatically. Remove the bob-
bin, cut off the thread and bring
the bobbin spindle up.
Bobbin winding - vertical spool pin
Procedures
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Rose 605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Rose 605 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info