518159
10
Zoom out
Zoom in
Previous page
1/64
Next page
Instruction book Rose
10
Threading the upper thread
!
Switch off the
main switch.
Make sure the presser
foot is raised and the
needle is in the up
position
1. Pull the spool pin out.
Place the thread on
the spool pin and the
spool holder on the spool pin as
described. Push the spool pin
back in.
2. Bring the thread in the direction
of the arrow under the thread
guide (a) and over the thread
guide (b).
3. Bring the thread down between
the thread tension discs.
4. Continue threading by drawing
the thread from the right into the
slot on the take-up lever.
5. Thread last guide just above
needle.
6. The needle is threaded from front
to back. The white on the presser
foot ankle makes it easy to see
the eye of the needle.
Upper thread warning
If the upper thread breaks or if
thread spool runs out, the machine
stops and gives a signal. The symbol
is flashing on the display.
If thread breaks: Re-thread the
machine. The symbol goes out.
If thread spool runs out: Remove
your work and the bobbin. Re-
thread the machine. Replace the
bobbin and restart.
7. Place thread under the presser
foot and into the thread knife
where it is cut.
Procedures
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Rose 605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Rose 605 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info