610265
18
Zoom out
Zoom in
Previous page
1/62
Next page
Control
panel
There
is
a
control
panel
on
the
upper
part
of
the
machine
for
setting
the
various
stitches,
etc.
By
means
of
the
symbols
you
can
select
all
the
settings
needed
for
sewing.
The
symbol
to
the
left
denotes
reverse
feeding.
As
long
as
the
button
is
depressed
the
machine
will
sew
the
selected
stitch
in
reverse
When
you
press the
button
under
one
of
the
symbols,
the
machine
will
automatically
select
a
stitch
width
and
length
suitable
in
most
cases.
Always
test
sew
first
at
this
setting.
If
you
require
other
settings,
it
is
possible
to
make
changes.
Changing
stitch
settings
The
stitch
length
is
indicated
in
the
left
digital
indicator
and
the
stitch
width
in
the
right
one.
The
buttons
under
the
digital
indi
cators
are
to
be
used
to
increase
or
decrease
the
values
from
0
to
6
mm.
In
certain
cases
the
stitch length
is
only variable
between
1.5
and
4.5
When
the red
light
above
the
right
digital
indicator
lights
up
you
cannot
use
the
twin
needle.
The
push-button
under
this
symbol
is
for
mirroring
the
engaged
stitch
pattern
each
or
every
other
time.
Please
refer
to
page
47.
Recommendation
The
letters
above
the
stitch
symbols
indicate
the
recommended
presser
foot.
The
upper
symbol
indicates
that
the
feed
dog
shall
be
lowered
when
sew
ing
on
buttons.
You
will
find
the
same
symbol
on
the
push-button
for
lower
ing
the
feed
dog.
Control
panel
Press
the
push-button
under
each
symbol
once
or
twice
to
engage
the
required
stitch
or
function.
Each
push-button
controls
two
stitches.
The
light
above
the
symbol
indicates
which
stitch
is
set.
mm.
18
18


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prisma-940

Reset search

  • Please clear and explain about hosquarna prisma 940adaptor including voltage and current thanks a lot
    Mohamadlajevardi@gmail.com Submitted on 15-12-2022 at 17:49

    Reply Report abuse
  • Please clear and explain about hosquarna prisma 940adaptor including voltage and current thanks a lot
    Mohamad lajevardi@gmail.com Submitted on 15-12-2022 at 17:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prisma 940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prisma 940 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info