610264

Husqvarna Prelude 360 Manual

20
Zoom out
Zoom in
Previous page
1/32
Next page
[111111
Sewing
Zippers
The
zipper
loot
F
can
be
snapped
on
so
that
it
is
located
either
to
the
right
or
to
the
left
of
the
needle,
making
it
easy
to
sew
loth
sides
of
the
zipper.
To
sew
the
other
side
of
the
zipper,
reposition
the
zipper
foot.
Lapped
Zipper
1.
Sew
the
seam
together
to
the
bottom
of
the
zipper
placket.
Baste
the
rest
of
the
scam.
Leave
about
2
cm
open
at
the
top.
Press
seam
open.
Set
the
needle
to
the
right
position.
2.
Place
presser
foot
F
to
the
left
of
the
needle.
From
the
wrong
side
ftld
the
fabric
to
one
side
so
both
seam
allow
ances
are
free.
Fold
and
press
the
left
allowance
under
approximately
0.5
cm
from
the
basted
seam.
3.
Place
the
zipper
under
the
ftlded
seam
allowance
with
the
teeth
as
near
to
the
fold
as
possible
and
stitch
zipper
to
fabric
close
to
fold.
Begin
sewing
at
the
bottom
of
the
zipper.
Before
reaching
the
zipper
pull,
lilt
the
presser
foot
and
slide
the
zipper
pull
down
past
the
zipper
ftot.
Lower
the
foot
and
sew
to
the
top
of
the
zipper.
4.
Snap
on
the
zipper
foot
so
it
is
to
the
right
of
the
needle.
Set
the
needle
to
the
left
position.
Turn
the
garment
to
the
right
side.
It
is
important
that
the
seam
on
the
right
side
is
sewn
straight.
Before
you
begin
to
sew,
mark
the
seam
line.
Sew
the
other
side
of
the
zipper.
Begin
stitching
across
the
bottom
and
continue
upwards.
Remove
the
basting.
If
you
want
to
sew
a
‘gentleman’s
zipper”.
follow
the
instructions
hut
insert
in
the
other
direction.
118
I.
2.
3.
4.
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-prelude-360

Reset search

  • How do I change from buttonhole mode to straight sewing. Machine will only sew a very short stitch. Submitted on 20-9-2023 at 04:41

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360? Submitted on 3-8-2022 at 02:23

    Reply Report abuse

  • How do I lower the feed teeth on Husqvarna Viking prelude 360 Submitted on 3-8-2022 at 02:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Prelude 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Prelude 360 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info