518134
20
Zoom out
Zoom in
Previous page
1/44
Next page
18
Functions and GraphicDisplay
NEEDLE STOP UP/DOWN is used to
move the needle down or up
and/or to set the needle stop
position up or down.
NOTE: When sewing, the needle can
be raised/lowered by lightly tapping
the foot control.
STOP is used to conclude a stitch.
Your Platinum 770 fastens the
thread and stops automatically
when a stitch sequence has been
completed. STOP is cancelled
when you touch the button again
or by selecting a new stitch.
When STOP is active, an icon is
shown on the GraphicDisplay. The
stop-function can be programmed.
FIX is used to tie off stitches.
When the button is pressed, an
icon is visible on the Graphic-
Display. By pressing the button
again the function can be turned
off. When beginning to sew,
Platinum 770 sews a few tie off
stitches and goes on with the
selected stitch. Touch FIX while
sewing and Platinum 770 sews
a few tie off stitches and stops
automatically. The fi x-function can
be programmed.
Touch + SPEED or - SPEED to
increase or decrease the sewing
speed.
All stitches in Platinum 770 have
a pre-set, recommended sewing
speed. When you select a stitch
Platinum 770 automatically sets
the correct sewing speed.
If you have reduced the speed
manually, your setting is retained
and kept for all stitches until your
Platinum 770 is turned off.
START/STOP is touched when you
want to run the machine without
using the foot control. Touch
START/STOP to begin and touch
it again to stop sewing.
REVERSE is pressed to sew in
reverse. When the button is
released, Platinum 770 sews for-
wards. The longest reverse stitch
length is 3 mm.
For permanent reverse, touch
the button twice in quick succes-
sion before starting to sew. The
reverse sewing is indicated by an
icon on the GraphicDisplay.
Platinum 770 sews in reverse
until you touch the button again.
Function Buttons
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 770 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info