518134
12
Zoom out
Zoom in
Previous page
1/44
Next page
10
Learn your Platinum 770
Placing the Bobbin in the Machine
Switch off the main switch.
1. Remove the bobbin cover by sliding it
towards you.
2. Place the bobbin in the bobbin case with
the markafacing up and the thread to
the left of the bobbin. The bobbin will
then rotate counter clockwise while pul-
ling out the thread.
3. Place your nger on the bobbin to keep
it from turning as you pull the thread
rmly to the right and then to the left
into the tension spring (a) until it ‘‘clicks’’
into place.
4. Continue threading around (b) and to
the right of and then left into the thread
cutter (c). Replace the cover (1). Pull the
thread to the left to cut it (2).
1
2
b
a
b
c
a
b
c
d
Bobbin Winding
1. Place an empty bobbin on the
bobbin spindle at the front of the
machine (the markafacing up). Push
the bobbin spindle down.
2. Place the large spool holder and a
felt pad under the spool on the auxi-
liary spool pin.
3. Bring the thread into the thread
tension guide (a), and under thread
guide (b) then over thread guide (c)
as illustrated.
NOTE: Depending on thread quality, take the
thread one or two turns around the bobbin
thread tension guide (a).
4. From above wind a few turns of
thread clockwise around the bobbin
and into the thread cutter (d).
5. Press the foot control. When the
bobbin is full, the winding will stop
automatically. Remove the bobbin
and cut off the thread. Bring the
bobbin spindle up.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 770 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info